Sketcher CompCreateConic/it: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "'''Sezione conica''' è un pulsante icona nella barra degli strumenti delle geometrie dello Sketcher che raggruppa gli strumenti per creare le curve basate sulla sezione di un...")
Line 9: Line 9:
==Descrizione==
==Descrizione==


'''Sezione conica''' è un pulsante icona nella barra degli strumenti delle geometrie dello Sketcher che raggruppa gli strumenti per creare le curve basate sulla sezione di un cono. Fare clic sulla freccia giù alla sua destra per espandere le icone sotto di esso e selezionare uno strumento.
'''Create a conic''' is an icon button in the Sketcher geometries toolbar that groups tools to create curves based on a section of a cone. Click on the down arrow to its right to expand the icons below it and select a tool.


==Types of conics==
==Types of conics==

Revision as of 21:26, 18 October 2018

Conica

Posizione nel menu
Nessuno (solo sulla barra degli strumenti)
Ambiente
Sketcher
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

Sezione conica è un pulsante icona nella barra degli strumenti delle geometrie dello Sketcher che raggruppa gli strumenti per creare le curve basate sulla sezione di un cono. Fare clic sulla freccia giù alla sua destra per espandere le icone sotto di esso e selezionare uno strumento.

Types of conics

  • Ellipse by center : Draws an ellipse by center point, major radius point and minor radius point.
  • Ellipse by 3 points : Draws an ellipse by major diameter (2 points) and minor radius point.
  • Arc of ellipse : Draws an arc of ellipse by center point, major radius point, starting point and ending point.
  • Arc of hyperbola: v0.17 and above Draws an arc of hyperbola.
  • Arc of parabola: v0.17 and above Draws an arc of parabola.