Ship Nuova nave

From FreeCAD Documentation
Revision as of 16:03, 21 March 2018 by Renatorivo (talk | contribs) (Created page with "== Creare un'istanza barca == Per creare una '''Ship instance''' (una istanza della barca) selezionare la geometria s60 ed eseguire lo strumento '''Crea una nuova nave''' (Sh...")

Nuova‏‎

Posizione nel menu
Ship design → Crea una nuova nave
Ambiente
Ship
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno


Introduzione

Da fare

Creare un'istanza barca

Per creare una Ship instance (una istanza della barca) selezionare la geometria s60 ed eseguire lo strumento Crea una nuova nave (Ship design → Crea una nuova barca).


Ship creation tool.
Ship creation tool.
Ship creation tool icon


Creating ship task dialogue and some annotations at 3D view will shown. The annotations will removed when you close Ship creation tool, so don't worry about this.


Most relevant ship data must be introduced (Ship uses a progressive data introduction system, so basic operations can be performed knowing only basic ship data, more information is needed as the operations become more complex).

Ship data

Main dimensions must be introduced here:

  • Length: Length between perpendiculars, 25.5 m for this ship.
  • Beam: Total ship beam, 3.389 m for this ship.
  • Draft: Design draft, 1.0 m for this ship.


Front view annotations
Front view annotations
Length annotations.


Usually the Length between perpendiculars depends on design draft, so if you don't know what is the length of your ship you can set draft, and fit length in order to get bow and draft intersection.


Side view annotations
Side view annotations
Beam annotations.


Same process is valid for Beam fit. Note that requested value is total beam, but annotation is only refered to starboard half ship.


When you press Accept button program creates your new Ship instance called Ship at Tags & Attributes dialog. We don't need geometry anymore, so you can hide it.


Ship instance icon
Ship instance icon
Ship instance icon.


From here onwards, you must have Ship selected before you execute any Ship tool.


Tutorial