Robot tutorial

From FreeCAD Documentation
Revision as of 18:06, 30 January 2011 by Jriegel (talk | contribs) (Created page with 'This tutorial is here to teach you how to use the Robot Workbench to simulate a robot cell set-up. == before you begin == This tutorial is written for FreeCAD Version 0.11 R…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This tutorial is here to teach you how to use the Robot Workbench to simulate a robot cell set-up.

before you begin

This tutorial is written for FreeCAD Version 0.11 R3977 or higher. So if you don't have FreeCAD on your computer go to the Download page and do the installation.

This tutorial targeting on the use of industrial robots and not mobile or service robots (see here).