逆向工程工作台

From FreeCAD Documentation
Revision as of 12:51, 16 October 2017 by Starofrainnight (talk | contribs) (Created page with "逆向工程工作台")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Reverse Engineering Workbench is intended to give you specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features. It is still in development.

At the moment there is NO functionality present in this workbench. It is used as a sandbox by the programmers.