Reverse Engineering Workbench: Difference between revisions

From FreeCAD Documentation
(Marked this version for translation)
(Separating the header from the main text)
Line 12: Line 12:
[[Image:Workbench_Reverse_Engineering.svg|thumb|128px|Reverse Engineering workbench icon]]
[[Image:Workbench_Reverse_Engineering.svg|thumb|128px|Reverse Engineering workbench icon]]


== Introduction == <!--T:1-->
== Introduction ==

<!--T:1-->
The [[Image:Workbench_Reverse_Engineering.svg|24px]] [[Reverse_Engineering_Workbench|Reverse Engineering Workbench]] is intended to give you specific tools to convert shapes, solids, and meshes into parametric FreeCAD features. It is still in development.
The [[Image:Workbench_Reverse_Engineering.svg|24px]] [[Reverse_Engineering_Workbench|Reverse Engineering Workbench]] is intended to give you specific tools to convert shapes, solids, and meshes into parametric FreeCAD features. It is still in development.



Revision as of 13:57, 16 September 2021

Reverse Engineering workbench icon

Introduction

The Reverse Engineering Workbench is intended to give you specific tools to convert shapes, solids, and meshes into parametric FreeCAD features. It is still in development.

At the moment there is no functionality present in this workbench. It is used as a sandbox by the programmers.

Tools

The Reverse Engineering (RE) tools are all located in the RE menu and the RE toolbar that appear when you load the RE workbench from the workbench dropdown menu.

  • Approximate a B-spline surface:


Development

Link to appropriate threads discussing this workbench