Reinforcement UShapeRebar: Difference between revisions
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
==Description== |
==Description== |
||
The UShape Rebar tool allows user to create a UShape reinforcing bar in the structural element. |
The {{KEY|[[Image:UShapeRebar.png|16px]] UShape Rebar}} tool allows user to create a UShape reinforcing bar in the structural element. |
||
[[Image:Footing UShapeRebar.png]] |
[[Image:Footing UShapeRebar.png]] |
Revision as of 08:51, 13 August 2017
Arch Rebar UShape |
Menu location |
---|
Arch → Rebar tools |
Workbenches |
Arch |
Default shortcut |
None |
Introduced in version |
- |
See also |
Arch Rebar |
Description
The UShape Rebar tool allows user to create a UShape reinforcing bar in the structural element.
How to use
- Create a structure element
- Select any face of the structure
- Then select UShape Rebar from the rebar tools
- A task panel will pop-out on the left side of the screen
- Select the desired orientation
- Give the inputs like front cover, right side cover, left side cover, bottom cover, top cover, rounding factor and diameter of the rebar
- Select the mode of distribution either amount or spacing
- If spacing is selected, a user can also opt for custom spacing
- Pick selected face is used to verify or change the face for rebar distribution
- Click OK or Apply to generate the rebars
- Click Cancel to exit the task panel
Properties
- DataOrientation: It decides the orientation of the rebar (like a bottom, top, right and left).
- DataFront Cover: The distance between rebar and selected face.
- DataRight Cover: The distance between the right end of the rebar to right face of the structure.
- DataLeft Cover: The distance between the left end of the rebar to the left face of the structure.
- DataBottom Cover: The distance between rebar from the bottom face of the structure.
- DataTop Cover: The distance between rebar from the top face of the structure.
- DataRounding: A rounding value to be applied to the corners of the bars, expressed in times the diameter.
- DataAmount: The amount of rebars.
- DataSpacing: The distance between the axes of each bar.