Reinforcement UShapeRebar: Difference between revisions
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
{{GuiCommand|Name=Arch Rebar UShape|Workbenches=[[Arch Module|Arch]]|MenuLocation=Arch → Rebar tools|Shortcut=None|SeeAlso=[[Arch_Rebar|Arch Rebar]]}} |
|||
⚫ | |||
⚫ | |||
<!--T:3--> |
|||
# Create a [[Arch Structure|structure]] element |
# Create a [[Arch Structure|structure]] element |
||
# Select any face of the structure |
# Select any face of the structure |
||
Line 14: | Line 16: | ||
# Click {{KEY|Cancel}} to exit the task panel |
# Click {{KEY|Cancel}} to exit the task panel |
||
==Properties== |
==Properties== |
||
<!--T:5--> |
|||
* {{PropertyData|Orientation}}: It decides the orientation of the rebar (like a bottom, top, right and left). |
* {{PropertyData|Orientation}}: It decides the orientation of the rebar (like a bottom, top, right and left). |
||
* {{PropertyData|Front Cover}}: The distance between rebar and selected face. |
* {{PropertyData|Front Cover}}: The distance between rebar and selected face. |
Revision as of 20:48, 12 August 2017
Arch Rebar UShape |
Menu location |
---|
Arch → Rebar tools |
Workbenches |
Arch |
Default shortcut |
None |
Introduced in version |
- |
See also |
Arch Rebar |
How to use
- Create a structure element
- Select any face of the structure
- Then select UShape Rebar from the rebar tools
- A task panel will pop-out on the left side of the screen
- Select the desired orientation
- Give the inputs like front cover, right side cover, left side cover, bottom cover, top cover, rounding factor and diameter of the rebar
- Select the mode of distribution either amount or spacing
- If spacing is selected, a user can also opt for custom spacing
- Pick selected face is used to verify or change the face for rebar distribution
- Click OK or Apply to generate the rebars
- Click Cancel to exit the task panel
Properties
- DataOrientation: It decides the orientation of the rebar (like a bottom, top, right and left).
- DataFront Cover: The distance between rebar and selected face.
- DataRight Cover: The distance between the right end of the rebar to right face of the structure.
- DataLeft Cover: The distance between the left end of the rebar to the left face of the structure.
- DataBottom Cover: The distance between rebar from the bottom face of the structure.
- DataTop Cover: The distance between rebar from the top face of the structure.
- DataRounding: A rounding value to be applied to the corners of the bars, expressed in times the diameter.
- DataAmount: The amount of rebars.
- DataSpacing: The distance between the axes of each bar.