Arch: Bara de armătură îndoită
Arch Rebar BentShape |
Menu location |
---|
Arch → Rebar tools |
Workbenches |
Arch |
Default shortcut |
None |
See also |
Stirrup |
This command is part of the Reinforcement AddOn, that you can install via menu Tools → Addons Manager |
Descriere
Instrumentul Bent Shape Rebar permite utilizatorului să creeze o formă de armătură bent shape reinforcing bar în elementul de structură.
Cum se folosește
- Creați un elemente de structure
- Select any face of the structure
- Then select Bent Shape Rebar from the rebar tools
- A task panel will pop-out on the left side of the screen as shown below
- Select the desired orientation
- Give the inputs like front cover, left cover, right cover, bottom cover, top cover, anchor length, bent angle, rounding and diameter of the rebar
- Select the mode of distribution either amount or spacing
- If spacing is selected, a user can also opt for custom spacing
- Pick selected face is used to verify or change the face for rebar distribution
- Click OK or Apply to generate the rebars
- Click pe Cancel pentru a ieși din task panel
Proprietăți
- DateOrientation: Acesta decide orinetrea armăturii (like a bottom, top, right and left).
- DateFront Cover: The distance between rebar and selected face.
- DateLeft Cover: The distance between the left end of the rebar to the left face of the structure.
- DateRight Cover: The distance between the right end of the rebar to right face of the structure.
- DateBottom Cover: The distance between rebar from the bottom face of the structure.
- DateTop Cover: The distance between rebar from the top face of the structure.
- DateAnchor Length: It is the arm's length of bent shape rebar.
- DateBent Angle: It decides angle in bent shape rebar.
- DateAmount: The amount of rebars.
- DateSpacing: Distanța între acele fiecărei bare.
Scrip-Programare
Instrumentul Bent Shape Rebar poate fi utilizat în macros și de la consola Python console utilizând următorele funcții:
makeBentShapeRebar(FrontCover, BottomCover, LeftCover, RightCover, Diameter, TopCover, BentLength, BentAngle, Rounding, AmountSpacingCheck, AmountSpacingValue, Orientation, Structure, Facename)
- The Bent Shape Rebar have four different orientations:
- Bottom
- Top
- Left
- Right
- Adds a Bent Shape reinforcing bar object to the given structural object.
- If no Structure and Facename is given, it will take user selected face as input.
- Here CoverAlong argument is having type tuple.
- Returnează noul obiect Rebar.
Examplu: Crearea unei armături tip Bent Shape rebar.
import Arch, BentShapeRebar
structure = Arch.makeStructure(length=1000.0, width=1000.0, height=100.0)
structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
rebar = BentShapeRebar.makeBentShapeRebar(20, 20, 20, 20, 8, 20, 100, 135, 2, True, 10, "Bottom", structure, "Face1")
Schimbarea proprietăților barei Bent Shape.
import BentShapeRebar
BentShapeRebar.editBentShapeRebar(rebar, 50, 50, 50, 50, 12, 20, 100, 135, 2, True, 10, "Top")