Pyramids and polyhedrons Workbench: Difference between revisions

From FreeCAD Documentation
No edit summary
mNo edit summary
Line 37: Line 37:


<!--T:9-->
<!--T:9-->
* Once installed, open workbench Polygons
* Once installed, open workbench Pyramids-and-Polyhedrons
* Click on a part of your choice and adjust the parameters to your preferences.
* Click on a part of your choice and adjust the parameters to your preferences.


<!--T:10-->
<!--T:10-->
Further details about this workbench can be found on the dedicated GitHub repo: https://github.com/eddyverl/FreeCad-Pyramids-and-Polyhedrons
Further details about this workbench can be found on the dedicated GitHub repo: https://github.com/eddyverl/FreeCad-Pyramids-and-Polyhedrons


== Discussion == <!--T:11-->
== Discussion == <!--T:11-->

Revision as of 18:47, 27 December 2020

Other languages:

The FreeCAD Pyramids-and-Polyhedrons External Workbench Icon


Description

This workbench creates:

  • Parametric pyramids
  • Parametric polyhedrons: tetrahedron, hexahedron, octahedron, dodecahedron, icosahedron, icosahedron_truncated
  • Geodesic spheres (with divisions 1 to 10)

Parameters like radius and side, ...can be adjusted just like with normal parts

Installation

Manual install

Go to https://github.com/eddyverl/FreeCad-Pyramids-and-Polyhedrons and follow the instructions over there.

Usage

  • Once installed, open workbench Pyramids-and-Polyhedrons
  • Click on a part of your choice and adjust the parameters to your preferences.

Further details about this workbench can be found on the dedicated GitHub repo: https://github.com/eddyverl/FreeCad-Pyramids-and-Polyhedrons

Discussion

Please direct your feedback, ideas, thoughts about this workbench to the dedicated FreeCAD forum thread (link). Bugs can also be submitted to the GitHub repo issue queue.