PartDesign tutorial/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "=== Prérequis === *FreeCAD version 0.16 ou supérieure *Avoir lu le tutoriel sur les esquisses")
(Created page with "=== Procédure === ==== Créer une forme géométrique 3D ==== L'objectif de l' ''' atelier PartDesign''' est de permettre à l'utilisateur de créer des formes géométriques...")
Line 20: Line 20:
*Avoir lu le [[Sketcher tutorial | tutoriel sur les esquisses]]
*Avoir lu le [[Sketcher tutorial | tutoriel sur les esquisses]]


=== Procedure ===
=== Procédure ===
==== Creating 3D geometry ====
==== Créer une forme géométrique 3D ====
L'objectif de l' ''' atelier PartDesign''' est de permettre à l'utilisateur de créer des formes géométriques dans un espace 3D, pour répondre à un certain besoin. Ainsi , sont mis à disposition des outils pour faire des esquisses et les convertir en objets 3D.
The purpose of the '''PartDesign Workbench''' is to allow the user to create geometry in 3D space to fulfill a certain need. As such, it is equipped with tools to make use of sketches and convert them to 3D objects.


There are two basic features to achieve this: [[Image:PartDesign_Pad.png|32px]] [[PartDesign_Pad|Pad]] and [[Image:PartDesign_Revolution.png|32px]] [[PartDesign_Revolution|Revolution]]. Alongside their subtractive counterparts ([[Image:PartDesign_Pocket.png|32px]] [[PartDesign_Pocket|Pocket]] and [[Image:PartDesign_Groove.png|32px]] [[PartDesign_Groove|Groove]]) they make up most of the common actions used by this workbench.
There are two basic features to achieve this: [[Image:PartDesign_Pad.png|32px]] [[PartDesign_Pad|Pad]] and [[Image:PartDesign_Revolution.png|32px]] [[PartDesign_Revolution|Revolution]]. Alongside their subtractive counterparts ([[Image:PartDesign_Pocket.png|32px]] [[PartDesign_Pocket|Pocket]] and [[Image:PartDesign_Groove.png|32px]] [[PartDesign_Groove|Groove]]) they make up most of the common actions used by this workbench.

Revision as of 13:18, 4 March 2016

Tutoriel
Thème
Sketcher
Niveau
Beginner
Temps d'exécution estimé
15 minutes
Auteurs
Drei
Version de FreeCAD
0.16 or above
Fichiers exemples
Voir aussi
None

Introduction

Ce tutoriel a pour but d'initier le lecteur à l'utilisisation de l' atelier PartDesign.

Ce tutorial se base sur l'esquisse crée précédmment.

File:PartDesign tutorial result.png

Prérequis

Procédure

Créer une forme géométrique 3D

L'objectif de l' atelier PartDesign est de permettre à l'utilisateur de créer des formes géométriques dans un espace 3D, pour répondre à un certain besoin. Ainsi , sont mis à disposition des outils pour faire des esquisses et les convertir en objets 3D.

There are two basic features to achieve this: Pad and Revolution. Alongside their subtractive counterparts ( Pocket and Groove) they make up most of the common actions used by this workbench.

  1. Switch to the PartDesign Workbench
  2. Select the sketch that was created in the Sketcher tutorial
  3. Select Pad
  4. Set the distance to 5 mm
  5. Select Ok

Another way to create 3D geometry is with the Revolution tool.

  1. Create a sketch based on the image above
  2. Select Revolution
  3. Set the angle to 360°

Subtracting Features

We'll begin by creating a sketch with the shape we want to subtract.

  1. Select the top face of the Pad
  2. Select New sketch
  3. Select External Geometry
  4. Approach the edge of the pad. An arc should be highlighted
  5. Select the arc. An arc of a different color should appear in the sketch
  6. Create a circle centered on the same point as the arc and set its radius to 5 mm


Afterwards, we'll proceed to apply a Pocket feature.

  1. Select the sketch
  2. Select Pocket
  3. Set the distance to Through all

Pattern Features

We are now finished with the basic workflow for the Sketcher Module.