PartDesign WizardShaft/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 13: Line 13:
[[Image:WizardShaft_Part.jpg|780px]]
[[Image:WizardShaft_Part.jpg|780px]]


The top of the window is taken up by the table. It is organized into numbered columns which correspond to segments of the shaft. A shaft segment is characterized by having certain length and diameter. The main window shows two tabs. One is the shaft part itself (a revolution feature), shown in the image above. The second tab shows graphs of the shear forces and moments created by the loads defined in the table.
Partea superioară a ferestrei este preluată din tabel. Este organizată în coloane numerotate care corespund segmentelor arborelui. A shaft segment is characterized by having certain length and diameter. The main window shows two tabs. One is the shaft part itself (a revolution feature), shown in the image above. The second tab shows graphs of the shear forces and moments created by the loads defined in the table.


[[Image:shaftwizard1.jpg|1024px]]
[[Image:shaftwizard1.jpg|1024px]]

Revision as of 19:32, 3 November 2018

PartDesign WizardShaft

Menu location
Part Design → Shaft design wizard...
Workbenches
PartDesign, Complete
Default shortcut
None
Introduced in version
-
See also
None

Introducere

Acest instrument vă permite să creați un arbore dintr-o tabelă de valori și să analizați forțele și momentele. Puteți porni asistentul din meniul Part Design sau tastând

Gui.runCommand('PartDesign_WizardShaft')

în consola Python a FreeCAD. Asistentul va porni și va afișa o masă implicită, partea corespunzătoare a arborelui și graficul forță / moment.

Partea superioară a ferestrei este preluată din tabel. Este organizată în coloane numerotate care corespund segmentelor arborelui. A shaft segment is characterized by having certain length and diameter. The main window shows two tabs. One is the shaft part itself (a revolution feature), shown in the image above. The second tab shows graphs of the shear forces and moments created by the loads defined in the table.

Condiții preliminare

Expertul pentru proiectarea arborelui depinde de biblioteca matplotlib pentru a crea și afișa graficele forței de forfecare și momentului de încovoiere. Sub sistemele Debian / Ubuntu, acesta este disponibil prin pachetul python-matplotlib.

Parameters

For each shaft segment, the following parameters can be defined

  • Length of the segment
  • Diameter of the segment
  • Load type. Note that you have to click on the desired entry in the menu after scrolling to it, otherwise it will not be selected!
    • None: No load
    • Fixed: The end of the shaft is fixed (e.g. welded to another part). This load type can only be defined for the first or last segment.
    • Static: There is a static load on this shaft segment
  • Load on the shaft segment
  • Location where the load is applied to the segment. The location is counted from the left-hand edge of the segment

(Other rows and load types exist but no functionality has been implemented yet)

Meniuri

Pentru a adăuga un nou segment de arbore, faceți clic dreapta în spațiul gol din partea dreaptă a tabelului și alegeți "Add column".

Limitări

  • Nu este posibil să aveți segmente adiacente ale arborelui cu același diametru.

Funcționalitate Planificată

  • Valori tabelare pentru șanfren și muchiile rotunjite pe marginea arborelui
  • Recognize a previously created shaft wizard part and initialize the table values from it
  • Shaft stress calculation
  • Visualization of loads on the shaft (can use the same functionality as for FEM module)
  • Definition of loads as a Document Object (can use the same functionality as for FEM module)
  • Material database
  • Permite încărcări cu forlțe pe direcția Z și în direcția Y (necesită definirea încărcărilor ca Document Object, altfel tabelul va deveni foarte lung)