PartDesign Point

From FreeCAD Documentation
Revision as of 18:23, 7 February 2018 by Renatorivo (talk | contribs) ({{Version|0.17}})

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

PartDesign Point

Menu location
PartDesign → Create a datum point
Workbenches
PartDesign, Complete
Default shortcut
None
Introduced in version
-
See also
None

Description

It is now possible to create datum planes/lines/points and attach them to features. Those datums can be used as basis for sketches or as revolution axis etc. There are a multitude of attachment possibilities for datums, try them out.

introduced in version 0.17

Datum point with OffsetZ=2


Use

  1. Click on in the toolbar, or choose PartDesign Create a datum point from the main menu,
  2. set options and parameters,
  3. click OK.

Options

Point parameters

Reference

  • Reference 1:
  • Reference 2:
    • Any:
  • Reference 3:
  • Reference 4:

Available modes

  • Object origin:
  • Focus1:
  • Focus2:
  • On edge:
  • Center of curvature:
  • Vertex:
  • Proximity Point 1:
  • Proximity Point 2:
    • Object origin:

Offset

  • OffsetZ, OffsetY, OffsetX:
  • RotateXY:

Limitations

Scripts

Links

Notes