PartDesign Plane/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "==Proprietăți==")
No edit summary
Line 4: Line 4:
==Descriere==
==Descriere==


Creați un plan de referință '''datum plane''' care poate fi folosit ca referință pentru schițe sau alte forme geometrice de referințe. Schițele pot fi atașate la planele de referință .
Creates a '''datum plane''' which can be used as reference for sketches or other datum geometry. Sketches can be attached to datum planes.


{{Version|0.17}}
{{Version|0.17}}

Revision as of 10:53, 2 October 2018

PartDesign Plane

Menu location
PartDesign → Create a datum plane
Workbenches
PartDesign, Complete
Default shortcut
None
Introduced in version
-
See also
PartDesign Point, PartDesign Line

Descriere

Creați un plan de referință datum plane care poate fi folosit ca referință pentru schițe sau alte forme geometrice de referințe. Schițele pot fi atașate la planele de referință .

introduced in version 0.17

Datum Plane crossing 3 corners of the Cube with a Cylinder sketched on it using the Datum Plane as its X-Y Plane.

Cum se folosește

  1. Press the Create a datum plane button.
  2. Define Plane parameters. Select a first reference in the 3D view to filter the available attachment modes.
  3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
  4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
  5. Select an attachment mode in the list.
  6. Define Attachment Offset values.
  7. Press OK.

Opţiuni

Double-click the DatumPlane label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.

Proprietăți

  • DateMapMode: lists the attachment mode used.
  • DateAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
  • DateLabel: name given to the object, this name can be changed at convenience.