PartDesign Migrate/it: Difference between revisions

From FreeCAD Documentation
(Created page with "PartDesign in FreeCAD v0.17 introduce nuovi strumenti ed elementi che non sono riconosciuti dalle vecchie versioni di FreeCAD (0.16 e precedenti). I documenti di FreeCAD creat...")
(Created page with "# Aprire un vecchio documento di FreeCAD (≤ 0,16). # Passare all'ambiente PartDesign. # Andare nel menu '''Part Design''' → '''Migra'''. # Se la migrazione funziona, viene...")
Line 9: Line 9:
== Utilizzo ==
== Utilizzo ==


# Open an older FreeCAD (≤ 0.16) document.
# Aprire un vecchio documento di FreeCAD (≤ 0,16).
# Switch to the PartDesign workbench.
# Passare all'ambiente PartDesign.
# Go to the '''Part Design''' → '''Migrate''' menu.
# Andare nel menu '''Part Design''' → '''Migra'''.
# If the migration works, a [[File:Std Part.png|24px]] [[Std Part|Part container]] will be created which will hold one or more [[File:PartDesign Body.png|24px]] [[PartDesign Body|Bodies]], each hosting a chain of features.
# Se la migrazione funziona, viene creato un [[File:Std Part.png|24px]] [[Std Part/it|contenitore Part]] che contiene uno o più [[File:PartDesign Body.png|24px]] [[PartDesign Body/it|Corpi]], ognuno dei quali ospita una catena di funzionalità.


==Limitations==
==Limitations==

Revision as of 16:52, 26 February 2018

Template:GuiCommandNoIcon/it

Descrizione

PartDesign in FreeCAD v0.17 introduce nuovi strumenti ed elementi che non sono riconosciuti dalle vecchie versioni di FreeCAD (0.16 e precedenti). I documenti di FreeCAD creati con versioni precedenti possono ancora essere aperti e modificati. Per beneficiare delle nuove funzionalità, è necessario migrarle tramite il menu PartDesign → Migra.

disponibile dalla versione 0.17

Utilizzo

  1. Aprire un vecchio documento di FreeCAD (≤ 0,16).
  2. Passare all'ambiente PartDesign.
  3. Andare nel menu Part DesignMigra.
  4. Se la migrazione funziona, viene creato un contenitore Part che contiene uno o più Corpi, ognuno dei quali ospita una catena di funzionalità.

Limitations

  • Before starting the migration process, check if the model was built with automatic refine options enabled (in Edit → Preferences → Part design → General), and set your preferences accordingly. This can be easily determined by successively toggling the visibility of the features in the Model tree. If no residual edges are left between features such as Pads and Pockets, the automatic refine options were disabled.
  • If a document to migrate only contains sketches and PartDesign features, the migration process may likely succeed. Some features such as chamfers and fillets may require rebuilding.
  • If the document to migrate has a mixed Part/Part Design/Draft work flow, the conversion will most likely fail or at best produce unexpected results, and will need to be migrated manually.