PartDesign AdditiveEllipsoid/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 20: Line 20:
== Opţiuni ==
== Opţiuni ==


Elipsoidul poate fi editat după crearea sa în două moduri:
The Ellipsoid can be edited after its creation in two ways:
* Double-clicking it in the Model tree, or by right-clicking and selecting '''Edit primitive''' in the contextual menu; this brings up the Primitive parameters.
* Double-clicking it in the Model tree, or by right-clicking and selecting '''Edit primitive''' in the contextual menu; this brings up the Primitive parameters.
* Via the [[Property editor]].
* Via the [[Property editor]].

Revision as of 08:56, 3 October 2018

PartDesign AdditiveEllipsoid

Menu location
Part Design → Create an additive primitive → Additive Ellipsoid
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
PartDesign CompPrimitiveAdditive

Descriere

Introduceți un elipsoid primitiv în corpul activ ca o funcție de bază sau îmbinați-l cu unul existent.

introduced in version 0.17

Cum se folosește

  1. Apăsați mai întâi butonul Additive Ellipsoid. Notă: Adezivul elipsoid face parte dintr-un meniu cu pictograme etichetat Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. To get to the Ellipsoid button, click on the down arrow besides the visible icon and select Additive Ellipsoid in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. An Ellipsoid feature appears under the active Body.

Opţiuni

Elipsoidul poate fi editat după crearea sa în două moduri:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Proprietăți

  • DateAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DateLabel: label given to the Ellipsoid object. Change to suit your needs.
  • DateRadius1: the radius value along the ellipsoid's vertical axis; by default, parallel to the Z-axis.
  • DateRadius2: the radius value along the ellipsoid's length; by default, parallel to the X-axis.
  • DateRadius3: the radius value along the ellipsoid's width; by default, parallel to the Y-axis. At the default value of zero, the ellipsoid forms an oblate spheroid. This has the same form as if Radius3 is identical to Radius2.
  • DateAngle1: (labelled V parameter in the Primitive parameters) lower truncation of the ellipsoid, parallel to the circular cross section (-90 degrees in a full spheroid)
  • DateAngle2: (unlabelled in the Primitive parameters) upper truncation of the ellipsoid, parallel to the circular cross section (90 degrees in a full spheroid).
  • DateAngle3: (labelled U parameter in the Primitive parameters) angle of rotation of the elliptical cross section (360 degrees in a full spheroid).