OpenSCAD: AddOpenSCADElement/Добавить элемент OpenSCAD

From FreeCAD Documentation
Revision as of 13:06, 11 December 2018 by Luc (talk | contribs) (Created page with "Начиная с FreeCAD версии 0.14, FreeCAD будет искать исполняемый файл OpenSCAD, если вышеупомянутая настройка...")

OpenSCAD AddOpenSCADElement

Системное название
OpenSCAD AddOpenSCADElement
Расположение в меню
OpenSCAD -> Add OpenSCAD Element
Верстаки
OpenSCAD
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

Добавьте элемент OpenSCAD, введя код OpenSCAD в панель задач и выполнив двоичный файл OpenSCAD (требуется OpenSCAD)

Когда выбран «как сетка», OpenSCAD визуализирует сетку.

Each time Add is pressed the OpenSCAD code is executed and elements are imported.

If OpenSCAD returns successfully, its messages are displayed as warnings in the report window. This will be the case if the path to imported, included and used files is broken. In case of undesired results it is highly recommend to have a look at the report windows, as there might be a lot of other output, created by the importer. If OpenSCAD fails, its messages will be loged as errors. Libraries should be accessible as usual, whereas example can be reached as stated below

include <../examples/example001.scad>;

would include the first examples also known as the OpenSCAD icon

Initial set up from within FreeCAD

  • OpenSCAD needs to be installed on your computer before FreeCAD will have this functionality
    • install OpenSCAD in the appropriate manner for your operating system. See the OpenSCAD web site for more information
  • FreeCAD needs to be told where to find the OpenSCAD executable
    • Switch to the OpenSCAD Workbench Menu -> View Workbench -> OpenSCAD
    • Open the preferences dialog Menu -> Edit -> Preferences
    • Click on "OpenSCAD" on the left plane
    • Click on the button labled "..." in General Settings -> General OpenSCAD Settings -> OpenSCAD executable to browser the directory or enter the path (e.g. Ubuntu based Linux distributions /usr/bin/openscad) directly into the line input right to the button
    • close and restart FreeCAD, a new OpenSCAD icon will appear on the tool bar, and in the OpenSCAD menu, in the FreeCAD OpenSCAD workbench
  • It is also possible to add another optional Parameter which controls the maximum sides of a polygon before it is considered a circle (fn).

Начиная с FreeCAD версии 0.14, FreeCAD будет искать исполняемый файл OpenSCAD, если вышеупомянутая настройка пуста.