Mesh FromPartShape/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "Abaterea de suprafață: Dacă acest număr este mai mic, ochiul devine mai fin. Valoarea cea mai mică este de 0,001.")
(Created page with "Lungimea maximă a muchiei: dacă acest număr este mai mic, ochiul devine mai fin. Valoarea cea mai mică este de 0,000.")
Line 24: Line 24:
[[Image:Mesh_Mesher_Mefisto.jpg]]
[[Image:Mesh_Mesher_Mefisto.jpg]]


Lungimea maximă a muchiei: dacă acest număr este mai mic, ochiul devine mai fin. Valoarea cea mai mică este de 0,000.
Maximum edge length: If this number is smaller the mesh becomes finer. Smallest value is 0,000.





Revision as of 20:10, 8 November 2018

Mesh MeshFromShape‏‎

Menu location
Meshes → Create Mesh from Shape
Workbenches
Mesh
Default shortcut
None
Introduced in version
-
See also
None

Introducere

Această comandă creează o plasă dintr-un obiect tip formă.

Utilizare

  1. Selectați obiectul de tip formă.
  2. Alegeți Meshes Create Mesh from shape... din meniul principal.
  3. Un meniu va cere utilizarea mesher-ului și valorile corespunzătoare pentru mesher


Doar selectând Meshes Create Mesh from shape... vă va oferi un meniu suplimentar pentru a vă alege forma de transformat în plasă


Standard Mesher

Abaterea de suprafață: Dacă acest număr este mai mic, ochiul devine mai fin. Valoarea cea mai mică este de 0,001.


Mefisto Mesher

Lungimea maximă a muchiei: dacă acest număr este mai mic, ochiul devine mai fin. Valoarea cea mai mică este de 0,000.


Netgen Mesher

You can choose between mesh being:

  • Very coarse
  • Coarse
  • Moderate
  • Fine
  • Very fine
  • User defined


For Mesh being "user defined" you can set these values:

    • Mesh size grading : If this parameter is smaller, mesh becomes finer. A value in the range of 0.1-10.
    • Element per edge : If this parameter is larger, mesh becomes finer. A value in the range of 0.1-10.
    • Element per curvature radius : If this parameter is larger, mesh becomes finer. A value in the range of 0.1-10.


For every main option you can also choose:

  • Optimize surface : Whether optimization of surface shape will be done.
  • Second order elements:Whether second order elments will be generated.
  • Quad dominant:Whether meshes will be arranged like hexahedral.

Limitations



Notes