Macro screw maker1 2
File:Text-x-python Macro_screw_maker1_2 |
Beschreibung |
---|
Creates a screw, bolt... with or without thread Versionsmakro : 2.3.1 Datum der letzten Änderung : 2018-10-22 Autor: Ulrich Brammer |
Autor |
Ulrich Brammer |
Herunterladen |
None |
Links |
Makros Rezepte Wie installiere ich Makros So passen Sie Symbolleisten an |
Macro-Version |
2.3.1 |
Datum der letzten Änderung |
2018-10-22 |
FreeCAD-Version(s) |
None |
Standardverknüpfung |
None |
Siehe auch |
None |
Description
This macro creates a screw with or without thread, according to ISO standards.
Usage
Select the characteristics of the screw and click on the create button.
If you select a circle on a hole, or alternatively the inner surface of a circular hole and the circle at top of that hole at the same time, the screw will be placed into the hole with the create button.
There is a message text, that will inform you, when the selected combination of properties is not available.
-
Interface of screw_maker and a few types of screws.
-
A screw with thread
The creation of the thread takes some time. Be patient and have a look at the CPU-usage.
Code
The lastest version of the macro is to be found at ScrewMaker.FCMacro but the easiest way to install this macro is through the Addon Manager.
Link
The forum Screw Maker