Macro Sito da contorni
Descrizione |
---|
Crea un sito Arch da una serie di contorni. Versione macro: 1.0 Ultima modifica: 2018-08-30 Versione FreeCAD: All Download: ToolBar Icon Autore: yorik |
Autore |
yorik |
Download |
ToolBar Icon |
Link |
Raccolta di macro Come installare le macro Personalizzare la toolbar |
Versione macro |
1.0 |
Data ultima modifica |
2018-08-30 |
Versioni di FreeCAD |
All |
Scorciatoia |
Nessuna |
Vedere anche |
Nessuno |
Descrizione
Questa macro consente di selezionare una serie di oggetti contenenti i contorni, curve di livello e di creare da essi un Sito Arch. I contorni possono essere raggruppati in qualsiasi numero di oggetti e non è necessario formare polilinee chiuse. Tutto ciò è gestito dalla macro. Internamente, viene creata una bspline da ciascun contorno, poi vengono create le superfici rigate tra i contorni, quindi queste superfici sono unite in un oggetto shell e infine viene creato un sito Arch usando questa shell come terreno.
Lo Script
Macro Site From Contours.FCMacro
# This macro builds an Arch Site object out of different level curves.
# It doesn't matter how many object contain the curves or if they
# are connected into wires or not.
import FreeCAD,FreeCADGui,Part,Draft,DraftGeomUtils,Arch
# first build a list of edges from selected objects
edges = []
for obj in FreeCADGui.Selection.getSelection():
edges.extend(obj.Shape.Edges)
# sort our edges into connected wires
wires = DraftGeomUtils.findWires(edges)
# build a bspline for each wire
bsplines = []
for wire in wires:
points = []
for vert in wire.Vertexes:
points.append(vert.Point)
bspline = Draft.makeBSpline(points)
bsplines.append(bspline)
# hide the bsplines
for bspline in bsplines:
bspline.ViewObject.hide()
# sort the bsplines by elevation (we use the z of their first point to sort)
bsplines.sort(key=lambda b: b.Points[0].z)
# build one ruled surface from each pair of bsplines
ruledsurfaces = []
for i in range(len(bsplines)-1):
ruled = FreeCAD.ActiveDocument.addObject('Part::RuledSurface', 'TerrainSection')
ruled.Curve1 = (bsplines[i],[''])
ruled.Curve2 = (bsplines[i+1],[''])
ruledsurfaces.append(ruled)
# hide the ruled surfaces
for ruled in ruledsurfaces:
ruled.ViewObject.hide()
# at this stade we need to recompute to build all the shapes before getting the faces
FreeCAD.ActiveDocument.recompute()
# make a shell object out of all the ruled surfaces
faces = []
for ruled in ruledsurfaces:
faces.extend(ruled.Shape.Faces)
shell = Part.Shell(faces)
terrain = FreeCAD.ActiveDocument.addObject('Part::Feature', 'Terrain')
terrain.Shape = shell
# make a site object using our shell as terrain
site = Arch.makeSite()
site.Terrain = terrain
# recompute one last time
FreeCAD.ActiveDocument.recompute()
Link
La discussione nel forum Create Toposurface from DXF