Macro Da Mesh a Part

From FreeCAD Documentation
Revision as of 19:42, 8 May 2014 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

File:Text-x-python MeshToPart

Descrizione
Questa macro converte gli oggetti Mesh selezionati in Parti. Ha una tolleranza ampia, quindi è da utilizzare solo con oggetti che non hanno curve altrimenti si ottengono strani risultati

Autore: Wmayer
Autore
Wmayer
Download
None
Link
Versione macro
1.0
Data ultima modifica
None
Versioni di FreeCAD
None
Scorciatoia
Nessuna
Vedere anche
Nessuno

Questa macro converte gli oggetti Mesh selezionati in Parti. Ha una tolleranza ampia, quindi è da utilizzare solo con oggetti che non hanno curve altrimenti si ottengono strani risultati

This macro converts selected meshes to parts. It has a broad tolerance, so use it only with objects that have no curves otherwise you'll get weird results


import FreeCAD,FreeCADGui,Mesh,Part,MeshPart
 
for obj in FreeCADGui.Selection.getSelection():
    if "Mesh" in obj.PropertiesList:
        faces = []      
        mesh = obj.Mesh
        segments = mesh.getPlanarSegments(0.01) # use rather strict tolerance here
 
        for i in segments:
          if len(i) > 0:
             # a segment can have inner holes
             wires = MeshPart.wireFromSegment(mesh, i)
             # we assume that the exterior boundary is that one with the biggest bounding box
             if len(wires) > 0:
                ext = None
                max_length = 0
                for i in wires:     
                   if i.BoundBox.DiagonalLength > max_length:
                      max_length = i.BoundBox.DiagonalLength
                      ext = i
                wires.remove(ext)
                # all interior wires mark a hole and must reverse their orientation, otherwise Part.Face fails
                for i in wires:
                   i.reverse()
                # make sure that the exterior wires comes as first in the lsit
                wires.insert(0, ext)
                faces.append(Part.Face(wires))
 
        shell=Part.Compound(faces)
        solid = Part.Solid(Part.Shell(faces))
        name = obj.Name
        FreeCAD.ActiveDocument.removeObject(name)
        FreeCAD.ActiveDocument.addObject("Part::Feature",name).Shape = solid

Link

The discussion on the forum Convert mesh to solid?