Macro Geodesic Dome/it: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "== Utilizzo ==")
Line 16: Line 16:
[[File:Geodome_frequency_parameter.png|1200px]]
[[File:Geodome_frequency_parameter.png|1200px]]


==How to use==
== Utilizzo ==


1. Install the macro using Addon Manager (menu Tools → Addon Manager). On tab "Macros", pick "GeodesicDome", click "Install". Then close addon manager.
1. Install the macro using Addon Manager (menu Tools → Addon Manager). On tab "Macros", pick "GeodesicDome", click "Install". Then close addon manager.

Revision as of 18:32, 29 April 2019

Other languages:

Cupola Geodetica

Descrizione
Questa macro crea il guscio parametrico di una cupola geodetica

Versione macro: 01.00
Ultima modifica: 2019-03-24
Autore: Ulrich Brammer, DeepSOIC, galou
Autore
Ulrich Brammer, DeepSOIC, galou
Download
None
Link
Versione macro
01.00
Data ultima modifica
2019-03-24
Versioni di FreeCAD
None
Scorciatoia
Nessuna
Vedere anche
Nessuno

Descrizione

Questa macro crea il guscio di una cupola (sfera) geodetica parametrica. Il raggio della cupola e il parametro di frequenza (fattore d'arco) sono definiti al momento della creazione.

Temporary code for external macro link. Do not use this code. This code is used exclusively by Addon Manager. Link for optional manual installation: Macro


# This code is copied instead of the original macro code
# to guide the user to the online download page.
# Use it if the code of the macro is larger than 64 KB and cannot be included in the wiki
# or if the RAW code URL is somewhere else in the wiki.

from PySide import QtGui, QtCore

diag = QtGui.QMessageBox(QtGui.QMessageBox.Information,
    "Information",
    "This macro must be downloaded from this link\n"
    "\n"
    "https://raw.githubusercontent.com/FreeCAD/FreeCAD-macros/master/ParametricObjectCreation/geodesic_dome/geodesic_dome.py" + "\n"
    "\n"
    "Quit this window to access the download page")

diag.setWindowFlags(QtCore.Qt.WindowStaysOnTopHint)
diag.setWindowModality(QtCore.Qt.ApplicationModal)
diag.exec_()

import webbrowser 
webbrowser.open("https://raw.githubusercontent.com/FreeCAD/FreeCAD-macros/master/ParametricObjectCreation/geodesic_dome/geodesic_dome.py")


Utilizzo

1. Install the macro using Addon Manager (menu Tools → Addon Manager). On tab "Macros", pick "GeodesicDome", click "Install". Then close addon manager.

2. Run GeodesicDome.FCMacro. A dialog should appear

3. Specify the parameters, click OK.

a dome shape should appear. You can then edit dome parameters by altering properties of GeoDome object.

Script

(this is an old, non-parametric version of the script. Up-to-date version is in FreeCAD-macros repository, here! )

Macro_Geodesic_Dome.FCMacro

# -*- coding: utf-8 -*-

# Form implementation generated from reading ui file 'geodesic_dialog.ui'
# And changed manually to use FreeCAD "Gui::InputField"
# Created: Sun Jan  4 22:20:58 2015
#      by: pyside-uic 0.2.15 running on PySide 1.2.2
#
# 
'''
************************************************************************
* Copyright (c)2015 Ulrich Brammer <ulrich1a[at]users.sourceforge.net> *
*                                                                      *
* This file is a supplement to the FreeCAD CAx development system.     *
*                                                                      *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU Lesser General Public License (LGPL)   *
* as published by the Free Software Foundation; either version 2 of    *
* the License, or (at your option) any later version.                  *
* for detail see the LICENCE text file.                                *
*                                                                      *
* This software is distributed in the hope that it will be useful,     *
* but WITHOUT ANY WARRANTY; without even the implied warranty of       *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        *
* GNU Library General Public License for more details.                 *
*                                                                      *
* You should have received a copy of the GNU Library General Public    *
* License along with this macro; if not, write to the Free Software    *
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 *
* USA                                                                  *
*                                                                      *
************************************************************************
'''


from PySide import QtCore, QtGui
import FreeCAD, FreeCADGui, math, Part
from FreeCAD import Base

class Ui_Dialog(object):
  def setupUi(self, Dialog):
    Dialog.setObjectName("Dialog")
    Dialog.resize(477, 188)
    self.dia = Dialog
    self.gridLayoutWidget = QtGui.QWidget(Dialog)
    self.gridLayoutWidget.setGeometry(QtCore.QRect(19, 19, 440, 141))
    self.gridLayoutWidget.setObjectName("gridLayoutWidget")
    self.gridLayout = QtGui.QGridLayout(self.gridLayoutWidget)
    self.gridLayout.setContentsMargins(0, 0, 0, 0)
    self.gridLayout.setObjectName("gridLayout")
    self.label = QtGui.QLabel(self.gridLayoutWidget)
    self.label.setObjectName("label")
    self.gridLayout.addWidget(self.label, 0, 0, 1, 1)
    #self.lineEdit = QtGui.QLineEdit(self.gridLayoutWidget)
    fui = FreeCADGui.UiLoader()
    self.lineEdit = fui.createWidget("Gui::InputField")
    
    self.lineEdit.setObjectName("lineEdit")
    self.gridLayout.addWidget(self.lineEdit, 0, 1, 1, 1)
    self.label_2 = QtGui.QLabel(self.gridLayoutWidget)
    self.label_2.setObjectName("label_2")
    self.gridLayout.addWidget(self.label_2, 1, 0, 1, 1)
    self.lineEdit_2 = QtGui.QLineEdit(self.gridLayoutWidget)
    self.lineEdit_2.setObjectName("lineEdit_2")
    self.gridLayout.addWidget(self.lineEdit_2, 1, 1, 1, 1)
    self.label_3 = QtGui.QLabel(self.gridLayoutWidget)
    self.label_3.setObjectName("label_3")
    self.gridLayout.addWidget(self.label_3, 2, 0, 1, 1)
    self.buttonBox = QtGui.QDialogButtonBox(self.gridLayoutWidget)
    self.buttonBox.setOrientation(QtCore.Qt.Horizontal)
    self.buttonBox.setStandardButtons \
      (QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok)
    self.buttonBox.setObjectName("buttonBox")
    self.gridLayout.addWidget(self.buttonBox, 2, 1, 1, 1)

    self.retranslateUi(Dialog)
    QtCore.QObject.connect(self.buttonBox, \
      QtCore.SIGNAL("accepted()"), self.makeSomething)
    QtCore.QObject.connect(self.buttonBox, \
      QtCore.SIGNAL("rejected()"), self.makeNothing)
    QtCore.QMetaObject.connectSlotsByName(Dialog)

  def retranslateUi(self, Dialog):
    Dialog.setWindowTitle(QtGui.QApplication.translate \
      ("Dialog", "Geodesic Dome Creator",  \
      None, QtGui.QApplication.UnicodeUTF8))
    self.label.setText(QtGui.QApplication.translate \
      ("Dialog", "Dome Radius", None, QtGui.QApplication.UnicodeUTF8))
    self.label_2.setText(QtGui.QApplication.translate \
      ("Dialog", "Frequency Parameter\n(Integer between 1 to 10)", \
      None,QtGui.QApplication.UnicodeUTF8))
    self.label_3.setText(QtGui.QApplication.translate \
      ("Dialog", "This Macro creates \na full geodesic dome shell.\nX-Y-symmetry plane \nfor even frequencies", \
      None, QtGui.QApplication.UnicodeUTF8))

  def makeSomething(self):
    print "accepted! Dome radius: ", self.lineEdit.property("text"), \
      " with Frequency: ", int(self.lineEdit_2.text())

    doc=App.activeDocument()
    label = "GeodesicDome"

    theDome = doc.addObject("Part::Feature",label)
    radius = self.lineEdit.property("text")
    frequency = int(self.lineEdit_2.text())
      
    self.dia.close()
    self.makeDome(theDome, radius, frequency)
    doc.recompute()
    
    
  def makeNothing(self):
    print "rejected!!"
    self.dia.close()
    


  def makeDome(self, obj, domeRad_str, ny):
    
    def makeFreqFaces(fPt, sPt, thPt, ny = 1):
      # makes the geodesic dome faces out of the points of an
      # icosahedron triangle
      b = self.a/ny # length of frequent triangles
      # definition of direction vectors
      growVec = (sPt - fPt)
      # growVec = (fPt - sPt)
      growVec.multiply(1.0/ny)
      crossVec = (thPt - sPt)
      # crossVec = (sPt - thPt)
      crossVec.multiply(1.0/ny)
      
      for k in range(ny):
        kThirdPt = fPt + growVec * (k+0.0)
        dThirdPt = Base.Vector(kThirdPt.x, kThirdPt.y, kThirdPt.z)
        dThirdPt = dThirdPt.normalize().multiply(domeRad.Value)
        kSecPt = fPt + growVec * (k+1.0)
        dSecPt = Base.Vector(kSecPt.x, kSecPt.y, kSecPt.z)
        dSecPt = dSecPt.normalize().multiply(domeRad.Value)
        # thirdEdge = Part.makeLine(kSecPt, kThirdPt)
        # thirdEdge = Part.makeLine(dSecPt, dThirdPt)
        for l in range(k+1):
          firstPt = kSecPt + crossVec *(l+1.0)
          dFirstPt = firstPt.normalize().multiply(domeRad.Value)
          secPt = kSecPt + crossVec *(l+0.0)
          dSecPt =secPt.normalize().multiply(domeRad.Value)
          thirdPt = kThirdPt + crossVec *(l+0.0)
          dThirdPt = thirdPt.normalize().multiply(domeRad.Value)
          #thirdEdge = Part.makeLine(secPt, thirdPt)
          thirdEdge = Part.makeLine(dSecPt, dThirdPt)
          # Part.show(thirdEdge)
          if l > 0:
            print "in l: ", l, " mod 2: ", l%2
            # What to do here?
            #secEdge = Part.makeLine(oThirdPt,thirdPt)
            secEdge = Part.makeLine(doThirdPt,dThirdPt)
            # Part.show(secEdge)
            #thirdEdge = Part.makeLine(secPt, thirdPt)
            #thirdEdge = Part.makeLine(dSecPt, dThirdPt)
            # Part.show(thirdEdge)
            triWire = Part.Wire([firstEdge, secEdge, thirdEdge])
            # Part.show(triWire)
            triFace = Part.Face(triWire)
            self.domeFaces.append(triFace)
            #Part.show(triFace)
          
          oThirdPt = thirdPt
          doThirdPt = oThirdPt.normalize().multiply(domeRad.Value)
          # oFirstPt = firstPt
          #firstEdge = Part.makeLine(thirdPt,firstPt)
          firstEdge = Part.makeLine(dThirdPt,dFirstPt)
          oFirstEdge = firstEdge
          #secEdge = Part.makeLine(firstPt,secPt)
          secEdge = Part.makeLine(dFirstPt,dSecPt)
          #Part.show(firstEdge)
          #Part.show(secEdge)
          #Part.show(thirdEdge)
          triWire = Part.Wire([firstEdge, secEdge, thirdEdge])
          triFace = Part.Face(triWire)
          self.domeFaces.append(triFace)
          #Part.show(triFace)
    
    
    domeRad = FreeCAD.Units.Quantity(domeRad_str)
  
    # self.a = Strutlength of underlying icosahedron:
    self.a=(4.0*domeRad.Value)/math.sqrt(2.0*math.sqrt(5.0)+10.0) 
    
    # icoAngle: angle of vertices of icosahedron points 
    # not a north or south pole
    self.icoAngle = math.atan(0.5)
    
    self.icoLat = domeRad.Value * math.sin(self.icoAngle)
    self.latRad = domeRad.Value * math.cos(self.icoAngle)
    self.ang36 = math.radians(36.0)
    
    # Calculation all points of the icosahedron
    self.icoPts = []
    self.icoPts.append(Base.Vector(0.0, 0.0, domeRad.Value))
    
    for i in range(10):
      self.icoCos = self.latRad * math.cos(i*self.ang36)
      self.icoSin = self.latRad * math.sin(i*self.ang36)
      if i%2 == 0:
        self.icoPts.append(Base.Vector(self.icoSin, self.icoCos, self.icoLat))
      else:
        self.icoPts.append(Base.Vector(self.icoSin, self.icoCos, -self.icoLat))
    
    self.icoPts.append(Base.Vector(0.0, 0.0, -domeRad.Value))
    
    # making the faces of the icosahedron
    
    self.icoFaces = [] # collects faces of the underlying icosahedron
    self.domeFaces = [] # collects the faces of the geodesic dome
    
    thirdPt = self.icoPts[9]
    thirdEdge = Part.makeLine(self.icoPts[0],thirdPt)
    for i in range(5):
      j = i*2+1
      firstEdge = Part.makeLine(thirdPt,self.icoPts[j])
      secEdge = Part.makeLine(self.icoPts[j],self.icoPts[0])
      triWire = Part.Wire([firstEdge, secEdge, thirdEdge])
      triFace = Part.Face(triWire)
      self.icoFaces.append(triFace)
      # Part.show(triFace)
      makeFreqFaces(self.icoPts[j], self.icoPts[0], thirdPt, ny)
      
      thirdEdge = Part.makeLine(self.icoPts[0],self.icoPts[j])
      thirdPt = self.icoPts[j]
      
    thirdPt = self.icoPts[9]
    secPt = self.icoPts[10]
    thirdEdge = Part.makeLine(secPt,thirdPt)
    
    for i in range(10):
      j = i+1
      firstEdge = Part.makeLine(thirdPt,self.icoPts[j])
      secEdge = Part.makeLine(self.icoPts[j],secPt)
      triWire = Part.Wire([firstEdge, secEdge, thirdEdge])
      triFace = Part.Face(triWire)
      self.icoFaces.append(triFace)
      #Part.show(triFace)
      makeFreqFaces(self.icoPts[j], secPt, thirdPt, ny)
    
      thirdPt = secPt  
      secPt = self.icoPts[j]  
      thirdEdge = Part.makeLine(secPt,thirdPt)
    
    
    thirdPt = self.icoPts[10]
    thirdEdge = Part.makeLine(self.icoPts[11],thirdPt)
    for i in range(5):
      j = i*2+2
      firstEdge = Part.makeLine(thirdPt,self.icoPts[j])
      secEdge = Part.makeLine(self.icoPts[j],self.icoPts[11])
      triWire = Part.Wire([firstEdge, secEdge, thirdEdge])
      triFace = Part.Face(triWire)
      self.icoFaces.append(triFace)
      #Part.show(triFace)
      makeFreqFaces(self.icoPts[j], self.icoPts[11], thirdPt, ny)
      
      thirdEdge = Part.makeLine(self.icoPts[11],self.icoPts[j])
      thirdPt = self.icoPts[j]
    
    # Shell of a corresponding icosahedron  
    newShell = Part.Shell(self.icoFaces)
    #Part.show(newShell)
    
    # Shell of the geodesic dome
    #self.domeShell = Part.Shell(self.domeFaces)
    #Part.show(self.domeShell)
    obj.Shape = Part.Shell(self.domeFaces)
    
    # Shere with radius of geodesic dome for debugging purposes
    testSphere = Part.makeSphere(domeRad.Value)
    #Part.show(testSphere)
  

d = QtGui.QWidget()
d.ui = Ui_Dialog()
d.ui.setupUi(d)
d.ui.lineEdit_2.setText("2")
d.ui.lineEdit.setProperty("text", "2 m")

d.show()