Atelierul Inspectare Vizuală

From FreeCAD Documentation
Revision as of 12:47, 21 September 2017 by Waverider (talk | contribs) (Created page with "Ca alternativă, puteţi folosi macro-comanda HighlightDifference ca să comparaţi două forme.")

Panoul Inspecţie a fost creat ca să vă ofere instrumente specifice pentru examinarea formelor. Se află în dezvoltare.

Intended Workflow:

  • Visual Inspection can be done via the pull-down-menu in the top row.
  • Select two shapes to be compared and select Inspection > Visual Inspection from the menu.
  • The shapes should intersect as much as possible.
  • You will get a colored image showing the deviation between the two shapes.

Ca alternativă, puteţi folosi macro-comanda HighlightDifference ca să comparaţi două forme.