Inspection Workbench/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "Panoul Inspectie")
 
(Created page with "Panoul Inspecţie a fost creat ca să vă ofere instrumente specifice pentru examinarea formelor. Se află în dezvoltare.")
Line 1: Line 1:
Panoul Inspecţie a fost creat ca să vă ofere instrumente specifice pentru examinarea formelor.
The Inspection Workbench is made to give you specific tools for examination of shapes.
Se află în dezvoltare.
It is still in development.


'''Intended Workflow:'''
'''Intended Workflow:'''

Revision as of 12:45, 21 September 2017

Panoul Inspecţie a fost creat ca să vă ofere instrumente specifice pentru examinarea formelor. Se află în dezvoltare.

Intended Workflow:

  • Visual Inspection can be done via the pull-down-menu in the top row.
  • Select two shapes to be compared and select Inspection > Visual Inspection from the menu.
  • The shapes should intersect as much as possible.
  • You will get a colored image showing the deviation between the two shapes.

Alternatively you could also use the macro HighlightDifference to compare two shapes.