Import from STL or OBJ/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 27: Line 27:
{{KEY| File}} → {{KEY| Import}} from the top menu.
{{KEY| File}} → {{KEY| Import}} from the top menu.


== Cleaning and repairing the STL/OBJ-File for preparing import ==
== Curățarea și repararea fișierului STL / OBJ pentru pregătirea importului ==
Basically, FreeCAD would import any STL/OBJ-File.
Practic, FreeCAD va importa orice fișier STL / OBJ.
Dar scopul nostru este să avem un solid care să poată fi măsurat și modificat (adăugând blocuri / gauri ...etc). Pentru o conversie reușită de la plasă la solid, trebuie să ne asigurăm că plasa este "impermeabilă" (nu are găuri) sau nu are alte erori.
But our goal is to have a solid which can be measured and changed (adding pads/pockets ..).
For a successful conversion from mesh to solid we need to make sure that the mesh is “water-tight”
(has no holes) or doesn’t have any other errors.
<br />
<br />
Scopul FreeCAD nu este acela de a fi un modelator de plasă bun, el este conceput să fie un modelator de solide. FreeCAD are câteva funcții pentru operarea cu ochiuri de plasă într-un atelier Mesh și OpenSCAD Workshop (unele operații necesită instalarea și configurarea OpenSCAD în preferințele FreeCAD).
FreeCAD’s aim is not to be a good mesh modeler, it is designed to be a solid modeler.
FreeCAD has some capabilities for mesh operation in mesh workbench and OpenSCAD workbench
(some operations need OpenSCAD to be installed and configured in the FreeCAD-preferences).
<br />
<br />
Unii utilizatori preferă să utilizeze software-ul terților pentru curățarea și repararea ochiurilor de plasă, de exemplu
Some users like to use third-party software for cleaning and repairing meshes, for example
* [http://www.netfabb.com/downloadcenter.php?basic=1 Netfabb Basic] (Windows/Linux/Mac) - free for personal use (automatic mesh repair available)
* [http://www.netfabb.com/downloadcenter.php?basic=1 Netfabb Basic] (Windows/Linux/Mac) - free for personal use (automatic mesh repair available)
* [http://meshlab.sourceforge.net/ Meshlab] (Windows/Linux/Mac) - Open Source
* [http://meshlab.sourceforge.net/ Meshlab] (Windows/Linux/Mac) - Open Source
<br />
<br />
In this tutorial we will use the mesh workbench within FreeCAD to clean/repair/verify the mesh of our sample file.
În acest tutorial vom folosi bancul de lucru cu plasă în cadrul FreeCAD clean/repair/verify plasa din fișierul eșantion.


===Automatic testing and repairing===
===Automatic testing and repairing===

Revision as of 11:49, 5 September 2018

Tutorial
Topic
Import from STL or OBJ
Level
Beginner
Time to complete
30 minutes
Authors
r-frank
FreeCAD version
0.16.6703
Example files
See also
None

Introducere

În acest tutorial, vom discuta cum să importați fișiere STL / OBJ în FreeCAD. Din moment ce ochiurile plaselor STL / OBJ sunt fără dimensiuni, FreeCAD va presupune la import că unitățile folosite în model sunt mm. Dacă nu este cazul, trebuie să vă scalați modelul, fie în aplicația în care a fost creată cu (înainte de a o exporta), fie trebuie să vă scalați modelul în FreeCAD după import și să-l convertiți într-un solid.

Eșantion

Pentru acest tutorial, puteți utiliza propriul fișier STL sau creați un fișier demo, făcând următoarele:

  • Open FreeCAD
  • Create a new document
  • Switch to the mesh workbench
  • Insert a torus by clicking on MeshesFile:Mesh RegularSolid.png Regular solid... , choosing settings like:
    • Radius1: 10 mm
    • Radius2: 2 mm
    • Sampling: 50
  • Click on Create and then on Close
  • Save your file with File Save to get a FreeCAD-File containing a mesh object


Pentru a importa un fișier STL sau OBJ în FreeCAD, creați un nou document FreeCAD și alegeți File Import from the top menu.

Curățarea și repararea fișierului STL / OBJ pentru pregătirea importului

Practic, FreeCAD va importa orice fișier STL / OBJ. Dar scopul nostru este să avem un solid care să poată fi măsurat și modificat (adăugând blocuri / gauri ...etc). Pentru o conversie reușită de la plasă la solid, trebuie să ne asigurăm că plasa este "impermeabilă" (nu are găuri) sau nu are alte erori.
Scopul FreeCAD nu este acela de a fi un modelator de plasă bun, el este conceput să fie un modelator de solide. FreeCAD are câteva funcții pentru operarea cu ochiuri de plasă într-un atelier Mesh și OpenSCAD Workshop (unele operații necesită instalarea și configurarea OpenSCAD în preferințele FreeCAD).
Unii utilizatori preferă să utilizeze software-ul terților pentru curățarea și repararea ochiurilor de plasă, de exemplu

  • Netfabb Basic (Windows/Linux/Mac) - free for personal use (automatic mesh repair available)
  • Meshlab (Windows/Linux/Mac) - Open Source


În acest tutorial vom folosi bancul de lucru cu plasă în cadrul FreeCAD clean/repair/verify plasa din fișierul eșantion.

Automatic testing and repairing

  • Open FreeCAD and the sample FreeCAD file containing the mesh object
  • Switch to mesh workbench
  • Make sure that your mesh object is selected in the tree view
  • Choose Meshes Analyze Evaluate & Repair mesh... from the top menu
  • Make sure the pull down menu on the top right corner displays the name of your mesh object
  • With the last point in the list reading "All above tests together" click on Analyze
  • The texts beside the tick boxes will change to reflect results of the different tests
  • If errors had been detected the corresponding check-boxes will be ticked and you will be able to select Repair
  • Choose Close to close the menu

Harmonizing normals

Harmonizing normals of a mesh object can be done by

  • Selecting your mesh object in the tree view
  • Choose Meshes Harmonize normals from the top menu.

Tip: By choosing the mesh object in the tree view, going to the view tab in the property view and changing "Lighting" from "Two Side" to "One Side" you can identify triangles with flipped normals. If the normals point into the mesh the triangle will be shown in black.

Closing holes

You can also manually close holes in your mesh object by

  • Selecting your mesh object in the tree view
  • Choose Meshes Fill holes... from the top menu
  • Specify maximum number of edges to be filled (3 is default)
  • Since STL and OBJ are meshes consisting of triangles the default number of edges should be sufficient


Another method of manually closing holes in your mesh object would be

  • Selecting your mesh object in the tree view
  • Choose Meshes Close hole from the top menu
  • Select one of the edges of the hole in the mesh object in the 3D view
  • Right-Click in 3D view and choose Leave hole-filling mode to exit the command

Conversion mesh to solid

  • Switch to part workbench
  • Make sure your mesh object is selected in the tree view, otherwise select it
  • Choose Part Create shape from mesh ... from top menu
  • Specify tolerance for sewing shape (0,1 is default)
  • A new object will be created in the tree view (with blue shape icon, instead of green mesh icon)
  • Select the newly created object in the tree view
  • Choose Part Refine shape from the top menu
  • A new object will be created in the tree view and the previous one will be made invisible
  • Select the newly created object in the tree view
  • Choose Part Convert to solid from the top menu
  • A new object will be created in the tree view, bearing "(Solid)" in its name, to indicate it is a solid


Since the created solid has no history and no editable features (like a simple copy in FreeCAD) you could delete all previous objects from the tree view. This would keep your file size small ...

Links