Image Workbench/ro: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Created page with "Atelierul Imagine gestionează diferite tipuri de imagini bitmap [http://en.wikipedia.org/wiki/Raster_graphics] și vă permite să le deschideți în FreeCAD. <br /> <br />...")
Line 1: Line 1:
<languages/>
<languages/>
The image module manages different types of [http://en.wikipedia.org/wiki/Raster_graphics bitmap images], and lets you open them in FreeCAD. <br />
Atelierul Imagine gestionează diferite tipuri de imagini bitmap [http://en.wikipedia.org/wiki/Raster_graphics] și vă permite le deschideți în FreeCAD. <br />
<br />
<br />
Currently, the modules lets you open .bmp, .jpg, .png and .xpm file formats in a separate viewer window.
În prezent, modulele permit deschideți fișiere în format .bmp, .jpg, .png și .xpm într-o fereastră de vizualizare separată.


The image workbenches also allows you to import an image on a plane in the 3D-space of FreeCAD. This function is available via the second button of the image workbench. [[File:Image_Import.png|32px]].
The image workbenches also allows you to import an image on a plane in the 3D-space of FreeCAD. This function is available via the second button of the image workbench. [[File:Image_Import.png|32px]].

Revision as of 17:56, 4 August 2018

Atelierul Imagine gestionează diferite tipuri de imagini bitmap [1] și vă permite să le deschideți în FreeCAD.

În prezent, modulele vă permit să deschideți fișiere în format .bmp, .jpg, .png și .xpm într-o fereastră de vizualizare separată.

The image workbenches also allows you to import an image on a plane in the 3D-space of FreeCAD. This function is available via the second button of the image workbench. .
The imported image can be attached like a sketch to one of the main three planes (XY/XZ/YZ) with positive or negativ offset.
This function is only available if you have opened a FreeCAD document.

The image can be moved in 3D-space by editing the placement in the Property editor.
The major use is tracing over the image, in order to generate a new part at using the image as template.

The image is imported with 1 pixel = 1mm. Therefore it is recommended to have the imported image in a reasonable resolution. The image can be scaled by editing the "XSize" and "YSize" values in the Property editor. The image can be also moved by editing the X/Y/Z-values in the Placement-Tab. The image can also be rotated around any axis by using the placement-dialogue.

Tip:
Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.
You can set an offset of -0,1 mm at import or later by editing the placement of the image.

Tools

Image Import

Raytracing Module/ro
Draft Module/ro