MEF: ElementFluid1D

From FreeCAD Documentation
Revision as of 12:19, 10 September 2018 by Luc (talk | contribs) (Created page with "==Limite==")

FEM ElementFluid1D

Menu location
Model → Fluid section for 1D flow
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM tutorial

Descriere

Creează o MEF secțiune de fluid penru rețele aerodinamice și hidraulice

Cum se folosește

  1. Click on sau alegeți Model Fluid section for 1D flow din meniul de sus.
  2. Selectați tipul Fluidului: Liquid, Gas or Open Channel
  3. Selectați tipul de Secțiune: Pipe Manning, Pipe Inlet etc.
  4. Entroduceți parametrii tipului de Secțiune.
  5. Selectați și adăugați muchia.

Limite

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html