FEM Sezione del fluido per il flusso 1D

From FreeCAD Documentation
Revision as of 13:50, 4 March 2018 by Renatorivo (talk | contribs) (Created page with "==Descrizione==")

Elemento Fluido 1D

Posizione nel menu
Modello → Sezione del fluido per il flusso 1D
Ambiente
FEM
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
FEM tutorial

Descrizione

Creates a FEM fluid section element for aerodynamic and hydraulic networks

How to use

  1. Click on or choose Model Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html