FEM ElementFluid1D/it: Difference between revisions
Renatorivo (talk | contribs) (Created page with "Crea un elemento FEM di sezione del fluido per le reti aerodinamiche e idrauliche") |
Renatorivo (talk | contribs) (Created page with "== Utilizzo ==") |
||
Line 5: | Line 5: | ||
Crea un elemento FEM di sezione del fluido per le reti aerodinamiche e idrauliche |
Crea un elemento FEM di sezione del fluido per le reti aerodinamiche e idrauliche |
||
== |
== Utilizzo == |
||
#Click on [[Image:FEM ElementFluid1D.png |32px]] or choose {{KEY|Model}} → {{KEY|[[Image:FEM ElementFluid1D.png |32px]] Fluid section for 1D flow}} from the top menu. |
#Click on [[Image:FEM ElementFluid1D.png |32px]] or choose {{KEY|Model}} → {{KEY|[[Image:FEM ElementFluid1D.png |32px]] Fluid section for 1D flow}} from the top menu. |
Revision as of 15:06, 4 March 2018
Elemento Fluido 1D |
Posizione nel menu |
---|
Modello → Sezione del fluido per il flusso 1D |
Ambiente |
FEM |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
FEM tutorial |
Descrizione
Crea un elemento FEM di sezione del fluido per le reti aerodinamiche e idrauliche
Utilizzo
- Click on or choose Model → Fluid section for 1D flow from the top menu.
- Select Fluid type: Liquid, Gas or Open Channel
- Select Section type: Pipe Manning, Pipe Inlet etc.
- Enter Section type parameters.
- Select and add edge.
Limitations
- The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html
Notes
- An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
- The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html