FEM ElementFluid1D/it: Difference between revisions

From FreeCAD Documentation
(Created page with "==Descrizione==")
(Created page with "Crea un elemento FEM di sezione del fluido per le reti aerodinamiche e idrauliche")
Line 3: Line 3:
==Descrizione==
==Descrizione==


Crea un elemento FEM di sezione del fluido per le reti aerodinamiche e idrauliche
Creates a FEM fluid section element for aerodynamic and hydraulic networks


==How to use==
==How to use==

Revision as of 15:06, 4 March 2018

Elemento Fluido 1D

Posizione nel menu
Modello → Sezione del fluido per il flusso 1D
Ambiente
FEM
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
FEM tutorial

Descrizione

Crea un elemento FEM di sezione del fluido per le reti aerodinamiche e idrauliche

How to use

  1. Click on or choose Model Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html