FEM ElementFluid1D/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
No edit summary
Line 1: Line 1:
{{GuiCommand/it|Name=FEM ElementFluid1D|Name/it=Elemento Fluido 1D|MenuLocation=Modello → Sezione del fluido per il flusso 1D||Workbenches=[[Fem Workbench/it|FEM]]|Shortcut=|SeeAlso=[[FEM_tutorial/it|FEM tutorial]]}}
<div class="mw-translate-fuzzy">
{{GuiCommand/it|Name=FEM ElementFluid1D|Name/it=Elemento Fluido 1D|MenuLocation=FEM → Sezione del fluido per il flusso 1D||Workbenches=[[Fem Workbench/it|FEM]]|Shortcut=|SeeAlso=[[FEM_tutorial/it|FEM tutorial]]}}
</div>


==Description==
==Description==

Revision as of 13:49, 4 March 2018

Elemento Fluido 1D

Posizione nel menu
Modello → Sezione del fluido per il flusso 1D
Ambiente
FEM
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
FEM tutorial

Description

Creates a FEM fluid section element for aerodynamic and hydraulic networks

How to use

  1. Click on or choose Model Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html