FEM ElementFluid1D/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 7: Line 7:
Creates a FEM fluid section element for aerodynamic and hydraulic networks
Creates a FEM fluid section element for aerodynamic and hydraulic networks


==Use==
==How to use==


#Click on [[Image:FEM ElementFluid1D.png ‎|32px]] or choose {{KEY|Model}} → {{KEY|[[Image:FEM ElementFluid1D.png ‎|32px]] Fluid section for 1D flow}} from the top menu.
#Click on [[Image:FEM ElementFluid1D.png ‎|32px]] or choose {{KEY|Model}} → {{KEY|[[Image:FEM ElementFluid1D.png ‎|32px]] Fluid section for 1D flow}} from the top menu.

Revision as of 09:06, 4 March 2018

Elemento Fluido 1D

Posizione nel menu
FEM → Sezione del fluido per il flusso 1D
Ambiente
FEM
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
FEM tutorial

Description

Creates a FEM fluid section element for aerodynamic and hydraulic networks

How to use

  1. Click on or choose Model Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html