FEM ElementFluid1D/it: Difference between revisions

From FreeCAD Documentation
(Created page with "FEM Elemento Fluido 1D")
 
(Created page with "{{GuiCommand/it|Name=FEM ElementFluid1D|Name/it=Elemento Fluido 1D|MenuLocation=FEM → Sezione del fluido per il flusso 1D||Workbenches=FEM|Shortcut=|See...")
Line 1: Line 1:
{{GuiCommand|Name=FEM ElementFluid1D|MenuLocation=FEM → Fluid section for 1D flow||Workbenches=[[Fem Workbench|FEM]]|Shortcut=|SeeAlso=[[FEM_tutorial|FEM tutorial]]}}
{{GuiCommand/it|Name=FEM ElementFluid1D|Name/it=Elemento Fluido 1D|MenuLocation=FEM → Sezione del fluido per il flusso 1D||Workbenches=[[Fem Workbench/it|FEM]]|Shortcut=|SeeAlso=[[FEM_tutorial/it|FEM tutorial]]}}


==Description==
==Description==

Revision as of 13:48, 25 February 2018

Elemento Fluido 1D

Posizione nel menu
FEM → Sezione del fluido per il flusso 1D
Ambiente
FEM
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
FEM tutorial

Description

Creates a FEM fluid section element for aerodynamic and hydraulic networks

Use

  1. Click on or choose FEM Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html