Drawing templates/fr: Difference between revisions

From FreeCAD Documentation
mNo edit summary
(Updating to match new version of source page)
Line 5: Line 5:
<!-- DrawingContent -->
<!-- DrawingContent -->
</syntaxhighlight>
</syntaxhighlight>
In addition to these two rules, as of FreeCAD 0.14, Revision 3009, information about the Border and Title block can be added to the template for use by the orthographic projection tool. This information defines where FreeCAD can, and can not place the projections.

To define the Border, the following line must appear before the <metadata tag in the svg file.
<syntaxhighlight>
<!-- Working space X1 Y1 X2 Y2 -->
</syntaxhighlight>
Where X1, Y1, X2, Y2 are defined as:
* X1 is the X axis distance from the left edge of the page to the left side of the Border.
* Y1 is the Y axis distance from the top edge of the page the the top of the Border.
* X2 is the X axis distance from the left edge of the page to the right side of the Border.
* Y2 is the Y axis distance from the top edge of the page the the bottom of the Border.
[[File:XY_Working.png]]

To define the Title block the following line must be inserted before the <metadata tag and after the Working space tag.
<syntaxhighlight>
<!-- Title block X1a Y1a X2a Y2a -->
</syntaxhighlight>
Where X1a, Y1a, X2a, Y2a are defined as:
* X1a is the X axis distance from the left edge of the page to the left side of the Title block
* Y1a is the Y axis distance from the top edge of the page the the top of the Title block
* X2a is the X Axis distance from the left edge of the page to the right side of the Title block
* Y2a is the Y axis distance from the top edge of the page the the bottom of the Title block
* X1a <= X1 or X2a >= X2
* Y1a <= Y1 or Y2a >= Y2
[[File:XY_Title.png]]

The following is an example of the code that defines the Working space and Title block areas that are to be inserted before the <metadata tag. You needn't specify a title block, but if you do it must be defined on the next line immediately following the Working space:
<syntaxhighlight>
<!-- Working space X1 Y1 X2 Y2 -->
<!-- Title block X1a Y1a X2a Y2a -->
</syntaxhighlight>

* Plusieurs attributs personnalisés peuvent être placés dans les modèles. La liste des attributs pris en charge actuellement est disponible sur la page [[Svg Namespace/fr|Svg Namespace]].
* Plusieurs attributs personnalisés peuvent être placés dans les modèles. La liste des attributs pris en charge actuellement est disponible sur la page [[Svg Namespace/fr|Svg Namespace]].



Revision as of 18:17, 12 January 2014

Créer des modèles de feuille pour l'atelier de Mise en plan (Drawing) est très facile. Il s'agit de fichiers SVG qui peuvent être créés avec n'importe quelle application capable d'exporter au format de fichier SVG, tel que Inkscape. Seulement deux directives doivent être respectées :

  • Un pixel = un millimètre
  • Vous devez insérer, quelque part dans votre code SVG, et où vous désirez que le contenu de votre dessin apparaisse (par exemple à la fin du fichier, juste avant la dernière balise </svg>), la ligne suivante :
 <!-- DrawingContent -->

In addition to these two rules, as of FreeCAD 0.14, Revision 3009, information about the Border and Title block can be added to the template for use by the orthographic projection tool. This information defines where FreeCAD can, and can not place the projections.

To define the Border, the following line must appear before the <metadata tag in the svg file.

<!-- Working space X1 Y1 X2 Y2 -->

Where X1, Y1, X2, Y2 are defined as:

  • X1 is the X axis distance from the left edge of the page to the left side of the Border.
  • Y1 is the Y axis distance from the top edge of the page the the top of the Border.
  • X2 is the X axis distance from the left edge of the page to the right side of the Border.
  • Y2 is the Y axis distance from the top edge of the page the the bottom of the Border.

File:XY Working.png

To define the Title block the following line must be inserted before the <metadata tag and after the Working space tag.

<!-- Title block X1a Y1a X2a Y2a -->

Where X1a, Y1a, X2a, Y2a are defined as:

  • X1a is the X axis distance from the left edge of the page to the left side of the Title block
  • Y1a is the Y axis distance from the top edge of the page the the top of the Title block
  • X2a is the X Axis distance from the left edge of the page to the right side of the Title block
  • Y2a is the Y axis distance from the top edge of the page the the bottom of the Title block
  • X1a <= X1 or X2a >= X2
  • Y1a <= Y1 or Y2a >= Y2

File:XY Title.png

The following is an example of the code that defines the Working space and Title block areas that are to be inserted before the <metadata tag. You needn't specify a title block, but if you do it must be defined on the next line immediately following the Working space:

<!-- Working space X1 Y1 X2 Y2 -->
<!-- Title block X1a Y1a X2a Y2a -->
  • Plusieurs attributs personnalisés peuvent être placés dans les modèles. La liste des attributs pris en charge actuellement est disponible sur la page Svg Namespace.

Modèles A3

A4 Templates

Landscape:

Portrait:

US Letter Templates

Landscape:

Portrait:

Autres standards disponibles