Draft Snap Intersection/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "===Descriere=== Acest mod de ancorare vă permite să selectați intersecția a două segmente de linii sau arce de cerc.")
(Created page with "=== Utilizați === #Asigurați-vă că modul de blocare este activat #Selectați elementul care trebuie inserat în documentul FreeCAD")
Line 7: Line 7:




===Use===
=== Utilizați ===
#Asigurați-vă că modul de blocare este activat
#Make sure snap mode is turned on
#Selectați elementul care trebuie inserat în documentul FreeCAD
#Choose element to be inserted into the FreeCAD-document


On Linux
On Linux

Revision as of 08:51, 16 November 2018

Draft Intersection

Menu location
Draft → Snap → Intersection
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
None

Descriere

Acest mod de ancorare vă permite să selectați intersecția a două segmente de linii sau arce de cerc.


Utilizați

  1. Asigurați-vă că modul de blocare este activat
  2. Selectați elementul care trebuie inserat în documentul FreeCAD

On Linux

  1. Move cursor near the Intersection of the elements you wish to attach your element to
  2. Below on the right side of the cursor the symbol of the snap mode will appear
  3. Click to attach your element to the selected intersection point of target elements

On Windows

  1. Press CTRL and move mouse near to intersection
  2. Below on the right side of the cursor the symbol of the snap mode will appear
  3. Click to attach your element to the selected intersection point of target elements

Works also with Draft Move and Draft Rotate


Notes

Snap mode can be used with

  • sketcher elements (lines)
  • draft elements (DWires, Lines)

Clicking on the snap-mode icon will toggle the snap mode on/off.