Draft Snap Angle/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "Draft: Angle")
 
(Created page with "===Descriere=== Se ancorează la punctele cardinale speciale ale cercurilor și ale arcurilor, la 45 ° și 90 °.")
Line 2: Line 2:
{{GuiCommand|Name=Draft Angle|Workbenches=[[Draft Module|Draft]], [[Arch Module|Arch]]|MenuLocation=Draft → [[Draft Snap|Snap]] → Angle|Shortcut=|SeeAlso=}}
{{GuiCommand|Name=Draft Angle|Workbenches=[[Draft Module|Draft]], [[Arch Module|Arch]]|MenuLocation=Draft → [[Draft Snap|Snap]] → Angle|Shortcut=|SeeAlso=}}


===Description===
===Descriere===
Snaps to the special cardinal points of circles and arcs, at 45° and 90°.
Se ancorează la punctele cardinale speciale ale cercurilor și ale arcurilor, la 45 ° și 90 °.


===Use===
===Use===

Revision as of 07:25, 16 November 2018

Draft Angle

Menu location
Draft → Snap → Angle
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
None

Descriere

Se ancorează la punctele cardinale speciale ale cercurilor și ale arcurilor, la 45 ° și 90 °.

Use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document
  3. Move cursor near one of the cardinal point you wish to attach your element to
  4. Below on the right side of the cursor the symbol of the snap mode will appear
  5. Click to attach your element to the selected endpoint of target element

Will also work with Draft Move and Draft Rotate.

Notes

Snap mode can be used with

  • sketcher elements (arcs, circles)
  • draft elements (arcs, circles)
  • edge of circular face of shape
  • edge of circular face of solid

Clicking on the snap-mode icon will toggle the snap mode on/off.