Path: 3D Surface

From FreeCAD Documentation
Revision as of 17:35, 24 December 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
This is an unfinished experimental feature. Enable Experimental Features

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Path 3DSurface

Menu location
Path → 3D Surface
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also
None

Descriere

Acest instrument creează o nouă operație 3D de suprafață. O operație 3D Surface utilizează întreaga suprafață superioară a modelului 3D pentru a genera codul G pentru lucrare.

The 3D Surface Tool interfaces to OCL.pyd, a 3rd party Open Source module titled OpenCamLib, that generates tool paths from a 3D Model. OpenCamLib is not integrated directly into FreeCAD to ensure their license is not violated. It requires that Experimental Features are enabled.

Utilizare

  1. Apăsați butonul File:Path 3DSurface.png 3D Surface button.
  2. Select the tool controller for the Operation from the Tool controller dialogue pop up window.
  3. Set the Finish Depth.
  4. Select between Dropcutter and Waterline for the Tool algorithm.
  5. Apicați, apoi apăsați OK pentru confirmare.

Proprietăți