Add FEM Equation Tutorial/ru: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 1: Line 1:
<languages/>
<languages/>

<div class="mw-translate-fuzzy">
{{TutorialInfo/ru
{{TutorialInfo/ru
|Topic= Учебник по добавлению уравнений в верстак FEM
|Topic= Учебник по добавлению уравнений в верстак FEM
Line 8: Line 10:
|Files=
|Files=
}}
}}
</div>


== Introduction ==
In this tutorial we are going to add the flow equation to FreeCAD and implement support for elmer solver. Please make sure you have read and understood [[Extend_FEM_Module| Extend FEM Module]] before reading this tutorial.


In this tutorial we are going to add the '''Flow''' equation to FreeCAD and implement support for the elmer solver. Please make sure you have read and understood [[Extend_FEM_Module|Extend FEM Module]] before reading this tutorial.
The task can be split into four parts. The first step is to make the FEM workbench aware of a new type of equation. This step must only be done if the equation doesn't exist in FreeCAD jet (as opposed to a equation that is already in FreeCAD but not supported by the target solver). The secound step is to add a concrete document object representing the elmer specific equation. The third step is to add support for the new equation to the solver object of elmer. After that the analysis export of elmer must be extended to support the new equation type.


The task can be split into five parts:
== New Equation Type ==
* '''New equation type'''. This step must only be done if the equation doesn't exist in FreeCAD yet (as opposed to a equation that is already in FreeCAD but not supported by the target solver).
* '''New equation object'''. Adding a concrete document object representing the elmer specific equation.
* '''Extend solver object'''. Adding support for the new equation to the solver object of elmer.
* '''Extend writer object'''. Extending the analysis export of elmer to support the new equation type.
* '''Gui tool to create a equation'''. Access the new equation function through workbench Gui.


== New equation type ==
In this step we are going to modify the following files:
* src/Mod/Fem/femsolver/equationbase.py
* src/Mod/Fem/femcommands/commands.py
* src/Mod/Fem/Gui/Workbench.cpp
* src/Mod/Fem/Gui/Resources/Fem.qrc
The equation type is shared among all equation objects of the different solver. Each type has a string specifier (e.g. &quot;Heat&quot;) and a dedicated command that adds the equation to the selected solver. This allows for a simpler GUI where we have only one button for the heat equation which is used for all supported solver.


In this step we are going to modify the following file:
First add the new equation to the {{incode|equationbase.py}} module. Each equation requires two classes. A document proxy and a view proxy. Just copy-paste them from an existing equation type and adjust the icon path inside getIcon(self) of the view proxy.

<pre>class FlowProxy(BaseProxy):
* {{FileName|src/Mod/Fem/femsolver/equationbase.py}}

The equation type is shared among all equation objects of the different solver. Each type has a string specifier (e.g. "Heat") and a dedicated command that adds the equation to the selected solver. This allows for a simpler GUI where we have only one button for the heat equation which is used for all supported solver.

First add the new equation to the {{Incode|equationbase.py}} module. Each equation requires two classes. A document proxy and a view proxy. Those two classes will later be used as base classes for the Elmer specific equation classes. Just copy-paste them from an existing equation type and adjust the icon path inside {{Incode|getIcon(self)}} of the view proxy.

{{Code|code=
class FlowProxy(BaseProxy):
pass
pass


class FlowViewProxy(BaseViewProxy):
class FlowViewProxy(BaseViewProxy):
def getIcon(self):
def getIcon(self):
return &quot;:/icons/FEM_EquationFlow.svg&quot;</pre>
return ":/icons/FEM_EquationFlow.svg"
}}


== New Elmer's equation object ==
Those two classes will later be used as base classes for the Elmer specific equation classes. In addition to those base classes we have to create a new command class that adds a flow equation to the selected solver object. Additionally, the new .svg image has to be registered for the GUI-button with {{incode|<file>icons/FEM_EquationFlow.svg</file>}} in {{incode|Fem.qrc}} (in {{incode|/Gui/Resources/}}). The related .svg has to be put into {{incode|/Gui/Resources/icons/}}.


In this step we are going to implement the document object. We need to add a new {{Incode|flow.py}} file at:
Next, the command/equation has to be added to the {{incode|femcommands/commands.py}} module. Just copy an existing command and adjust the icon, menu text and tool-tip in __init__(self). '''Don't forget''' to register the command at the bottom of the module file by using the addCommand(...) method. Please see the discussion in the forum at https://forum.freecadweb.org/viewtopic.php?f=18&t=46693&start=10#p402004 if icons are involved.
<pre>
class _EquationFlow(CommandManager):
"The FEM_EquationFlow command definition"


* {{FileName|src/Mod/Fem/femsolver/elmer/equations/flow.py}}
def __init__(self):
super(_EquationFlow, self).__init__()
self.menuetext = "Flow equation"
self.tooltip = "Creates a FEM equation for flow"
self.is_active = "with_solver_elmer"
self.do_activated = "add_obj_on_gui_selobj_noset_edit"
...
FreeCADGui.addCommand(
"FEM_EquationFlow",
_EquationFlow()
)
</pre>


and modify the following files:
Our newly created command still needs to be made accessible via the GUI of the FEM workbench. To add it to the toolbar search for the following code snippet in {{incode|/Gui/Workbench.cpp}} and add the new command to the rest of the equation commands.
<pre>
Gui::ToolBarItem* solve = new Gui::ToolBarItem(root);
solve->setCommand("Solve");
*solve << "FEM_SolverCalculixCxxtools"
<< "FEM_SolverCalculiX"
<< "FEM_SolverElmer"
<< "Separator"
<< "FEM_EquationElasticity"
<< "FEM_EquationElectrostatic"
+ << "FEM_EquationFlow"
<< "FEM_EquationFluxsolver"
<< "FEM_EquationElectricforce"
<< "FEM_EquationHeat"
<< "Separator"
<< "FEM_SolverControl"
<< "FEM_SolverRun";
</pre>
We are also going to add the flow equation command to the solve menu of the FEM workbench. To do this insert our equation into the following code snippet in {{incode|Workbench.cpp}}.
<pre>
Gui::MenuItem* solve = new Gui::MenuItem;
root->insertItem(item, solve);
solve->setCommand("&Solve");
*solve << "FEM_SolverCalculixCxxtools"
<< "FEM_SolverCalculiX"
<< "FEM_SolverElmer"
<< "FEM_SolverZ88"
<< "Separator"
<< "FEM_EquationElasticity"
<< "FEM_EquationElectrostatic"
+ << "FEM_EquationFlow"
<< "FEM_EquationFluxsolver"
<< "FEM_EquationElectricforce"
<< "FEM_EquationHeat"
<< "Separator"
<< "FEM_SolverControl"
<< "FEM_SolverRun";
</pre>


* {{FileName|src/Mod/Fem/ObjectsFem.py}}
* {{FileName|src/Mod/Fem/CMakeLists.txt}}


Let's start with adding the new {{Incode|flow.py}} file. This file can be copied from an existing equation.
== Elmer's Equation Object ==


=== Keywords ===
In this step we are going to modify the following file:

* src/Mod/Fem/CMakeLists.txt
* If the new equation only supports keywords for '''linear''' systems copy the {{Incode|femsolver/elmer/equations/elasticity.py}} module.
and add the following new file:
* src/Mod/Fem/femsolver/elmer/equations/flow.py
* If the new equation supports keywords for both '''linear''' and '''non-linear''' systems, copy {{Incode|femsolver/elmer/equations/heat.py}}.

Lets start with the module that implements the document object. In can be copied from an existing equation. If the new equation only supports keywords for '''linear''' systems copy the {{incode|femsolver/elmer/equations/elasticity.py}} module. If it supports '''non-linear''' keywords too copy {{incode|femsolver/elmer/equations/heat.py}}. The flow equation in Elmer is a potentially non-linear equation. This means that we are going to base our work on {{incode|heat.py}}.
The flow equation in Elmer is a potentially non-linear equation. This means that we are going to base our work on {{Incode|heat.py}}.

=== Editing files ===

After copying {{Incode|heat.py}} to {{Incode|flow.py}}, adjust {{Incode|flow.py}} in these locations:
* the name argument of the {{Incode|create}} module function,
* the base classes of the {{Incode|Proxy}} class,
* the {{Incode|Type}} attribute of the {{Incode|Proxy}} class,
* the {{Incode|ViewProxy}} classes.


{{Code|code=
After copying {{incode|heat.py}} to {{incode|flow.py}} adjust - the name argument of the create module function, - the Type attribute of the Proxy class, - the base classes of the {{incode|Proxy}} and the {{incode|ViewProxy}} classes, - and the properties added via the {{incode|obj.addProperty(..)}} function to those needed by the equation.
def create(doc, name="'''Flow'''"):
<pre>
def create(doc, name=&quot;Flow&quot;):
return femutils.createObject(
return femutils.createObject(
doc, name, Proxy, ViewProxy)
doc, name, Proxy, ViewProxy)


class Proxy(nonlinear.Proxy, equationbase.'''Flow'''Proxy):


Type = "Fem::EquationElmer'''Flow'''"
class Proxy(nonlinear.Proxy, equationbase.FlowProxy):

Type = &quot;Fem::EquationElmerFlow&quot;


def __init__(self, obj):
def __init__(self, obj):
Line 114: Line 83:
obj.Priority = 10
obj.Priority = 10


class ViewProxy(nonlinear.ViewProxy, equationbase.'''Flow'''ViewProxy):

class ViewProxy(nonlinear.ViewProxy, equationbase.FlowViewProxy):
pass
pass
}}
</pre>


Then you need to change the properties added via the {{Incode|obj.addProperty(..)}} function to those needed by the equation.
At the moment of writing this tutorial Elmer flow equation doesn't have any special properties. See Elmer elasticity equation for an example with properties.


At the moment of writing this tutorial Elmer flow equation doesn't have any special properties. See Elmer elasticity equation for an example with properties.
Last but not least register the new module file ({{incode|flow.py}}) in {{incode|src/Mod/Fem/CMakeLists.txt}} the way described in [https://www.freecadweb.org/wiki/Extend_FEM_Module Extend FEM Module]. The suitable lists can be easily found by searching for existing equation modules files of Elmer.


Finally one hast to register a '''makeEquationStatcurrent''' definition in {{incode|ObjectsFem.py}} by duplicating an available entry.
Finally one has to register a '''makeEquationFlow''' definition in {{Incode|src/Mod/Fem/ObjectsFem.py}} by duplicating an available entry.


FreeCAD uses '''make''' to build the program. So we need to register the new module file ({{Incode|flow.py}}) in {{Incode|src/Mod/Fem/CMakeLists.txt}} the way described in [https://www.freecadweb.org/wiki/Extend_FEM_Module Extend FEM Module]. The suitable lists can be easily found by searching for existing equation modules files of Elmer.


== Extend Solver Object ==
== Extend Solver Object ==


In this step we are going to modify the following file:
In this step we are going to modify the following file:
* src/Mod/Fem/femsolver/elmer/solver.py
Right now we made FreeCAD aware that there is a new type of equation and even added a command that adds this equation to the selected solver object. We also implemented a concrete equation object for Elmer. Whats left to do now it to make the connection between Elmer and the flow equation. This must be done directly in Elmer solver object.


* {{FileName|src/Mod/Fem/femsolver/elmer/solver.py}}
Register the module in which we just implemented our new equation object ({{incode|flow.py}}) with the equation specifier from step 1 (&quot;Flow&quot;) in the {{incode|_EQUATIONS}} list in {{incode|elmer/solver.py}}.

<pre>
Right now we made FreeCAD aware that there is a new type of equation and even added a command that adds this equation to the selected solver object. We also implemented a concrete equation object for Elmer. Whats left to do now is to make the connection between Elmer and the flow equation. This must be done directly in Elmer solver object.

Register the module in which we just implemented our new equation object ({{Incode|flow.py}}) with the equation specifier from step 1 ("Flow") in the {{Incode|_EQUATIONS}} list in {{Incode|elmer/solver.py}}.

{{Code|code=
from .equations import electrostatic
from .equations import electrostatic
+from .equations import flow
+from .equations import flow
Line 140: Line 112:


_EQUATIONS = {
_EQUATIONS = {
&quot;Heat&quot;: heat,
"Heat": heat,
&quot;Elasticity&quot;: elasticity,
"Elasticity": elasticity,
+ &quot;Flow&quot;: flow,
+ "Flow": flow,
}
}
}}
</pre>


== Extend Analysis Export ==
== Extend writer object ==


In this step we are going to modify the following file:
In this step we are going to modify the following file:
* src/Mod/Fem/femsolver/elmer/writer.py
This is the most demanding part of implementing a new equation. This file contains the {{incode|Writer}} class which exports the analysis into Elmer sif format.


* {{FileName|src/Mod/Fem/femsolver/elmer/writer.py}}
For every supported equation there are a series of methods handling the export of the respective equation. Just copy all of them from an existing equation and adjust them to your needs. Our flow equation uses the following methods:

* _handleFlow
This file contains the {{Incode|Writer}} class which exports the analysis into Elmer SIF format.
* _getFlowSolver

* _handleFlowConstants
For every supported equation there are two main methods handling the export of the respective equation. Just copy all of them from an existing equation and adjust them to your needs.
* _handleFlowMaterial

* _handleFlowInitialVelocity
* {{Incode|_getFlowSolver}}
* _handleFlowBndConditions
* {{Incode|_handleFlow}}
* _handleFlowEquation

{{clear}}
You need to register the {{Incode|_handleFlow}} method inside the {{Incode|Writer}} class:

{{Code|code=
class Writer(object):
...
def write(self):
...
self._handleFlow()

...

}}

{{Incode|_handleFlow}} can control a series of other detailed methods. Our flow equation uses the following detailed methods:

* {{Incode|_handleFlowConstants}}
* {{Incode|_handleFlowMaterial}}
* {{Incode|_handleFlowInitialVelocity}}
* {{Incode|_handleFlowBndConditions}}
* {{Incode|_handleFlowEquation}}

We now finished the function part of the new equation. Next we'll connect the new equation through the GUI.

== Gui tool to create an equation ==

We have just created a new equation class. To access it from the FEM GUI, we need to create a button and link it to the new equation class. Here is a tutorial: [[Add_button_to_FEM_toolbar_tutorial|Add button to FEM toolbar tutorial]].

[[Category:FEM{{#translation:}}]]
[[Category:FEM{{#translation:}}]]
[[Category:Developer Documentation{{#translation:}}]]

Revision as of 19:00, 20 August 2021

Other languages:
Руководство
Тема
Учебник по добавлению уравнений в верстак FEM
Уровень
Время для завершения
Авторы
M42kus
FreeCAD версия
Примеры файлов
Смотрите также
None

Introduction

In this tutorial we are going to add the Flow equation to FreeCAD and implement support for the elmer solver. Please make sure you have read and understood Extend FEM Module before reading this tutorial.

The task can be split into five parts:

  • New equation type. This step must only be done if the equation doesn't exist in FreeCAD yet (as opposed to a equation that is already in FreeCAD but not supported by the target solver).
  • New equation object. Adding a concrete document object representing the elmer specific equation.
  • Extend solver object. Adding support for the new equation to the solver object of elmer.
  • Extend writer object. Extending the analysis export of elmer to support the new equation type.
  • Gui tool to create a equation. Access the new equation function through workbench Gui.

New equation type

In this step we are going to modify the following file:

  • src/Mod/Fem/femsolver/equationbase.py

The equation type is shared among all equation objects of the different solver. Each type has a string specifier (e.g. "Heat") and a dedicated command that adds the equation to the selected solver. This allows for a simpler GUI where we have only one button for the heat equation which is used for all supported solver.

First add the new equation to the equationbase.py module. Each equation requires two classes. A document proxy and a view proxy. Those two classes will later be used as base classes for the Elmer specific equation classes. Just copy-paste them from an existing equation type and adjust the icon path inside getIcon(self) of the view proxy.

class FlowProxy(BaseProxy):
    pass

class FlowViewProxy(BaseViewProxy):
    def getIcon(self):
        return ":/icons/FEM_EquationFlow.svg"

New Elmer's equation object

In this step we are going to implement the document object. We need to add a new flow.py file at:

  • src/Mod/Fem/femsolver/elmer/equations/flow.py

and modify the following files:

  • src/Mod/Fem/ObjectsFem.py
  • src/Mod/Fem/CMakeLists.txt

Let's start with adding the new flow.py file. This file can be copied from an existing equation.

Keywords

  • If the new equation only supports keywords for linear systems copy the femsolver/elmer/equations/elasticity.py module.
  • If the new equation supports keywords for both linear and non-linear systems, copy femsolver/elmer/equations/heat.py.

The flow equation in Elmer is a potentially non-linear equation. This means that we are going to base our work on heat.py.

Editing files

After copying heat.py to flow.py, adjust flow.py in these locations:

  • the name argument of the create module function,
  • the base classes of the Proxy class,
  • the Type attribute of the Proxy class,
  • the ViewProxy classes.
def create(doc, name="'''Flow'''"):
    return femutils.createObject(
        doc, name, Proxy, ViewProxy)

class Proxy(nonlinear.Proxy, equationbase.'''Flow'''Proxy):

    Type = "Fem::EquationElmer'''Flow'''"

    def __init__(self, obj):
        super(Proxy, self).__init__(obj)
        obj.Priority = 10

class ViewProxy(nonlinear.ViewProxy, equationbase.'''Flow'''ViewProxy):
    pass

Then you need to change the properties added via the obj.addProperty(..) function to those needed by the equation.

At the moment of writing this tutorial Elmer flow equation doesn't have any special properties. See Elmer elasticity equation for an example with properties.

Finally one has to register a makeEquationFlow definition in src/Mod/Fem/ObjectsFem.py by duplicating an available entry.

FreeCAD uses make to build the program. So we need to register the new module file (flow.py) in src/Mod/Fem/CMakeLists.txt the way described in Extend FEM Module. The suitable lists can be easily found by searching for existing equation modules files of Elmer.

Extend Solver Object

In this step we are going to modify the following file:

  • src/Mod/Fem/femsolver/elmer/solver.py

Right now we made FreeCAD aware that there is a new type of equation and even added a command that adds this equation to the selected solver object. We also implemented a concrete equation object for Elmer. Whats left to do now is to make the connection between Elmer and the flow equation. This must be done directly in Elmer solver object.

Register the module in which we just implemented our new equation object (flow.py) with the equation specifier from step 1 ("Flow") in the _EQUATIONS list in elmer/solver.py.

from .equations import electrostatic
+from .equations import flow

...

_EQUATIONS = {
    "Heat": heat,
    "Elasticity": elasticity,
+    "Flow": flow,
}

Extend writer object

In this step we are going to modify the following file:

  • src/Mod/Fem/femsolver/elmer/writer.py

This file contains the Writer class which exports the analysis into Elmer SIF format.

For every supported equation there are two main methods handling the export of the respective equation. Just copy all of them from an existing equation and adjust them to your needs.

  • _getFlowSolver
  • _handleFlow

You need to register the _handleFlow method inside the Writer class:

class Writer(object):
...
    def write(self):
...
        self._handleFlow()

...

_handleFlow can control a series of other detailed methods. Our flow equation uses the following detailed methods:

  • _handleFlowConstants
  • _handleFlowMaterial
  • _handleFlowInitialVelocity
  • _handleFlowBndConditions
  • _handleFlowEquation

We now finished the function part of the new equation. Next we'll connect the new equation through the GUI.

Gui tool to create an equation

We have just created a new equation class. To access it from the FEM GUI, we need to create a button and link it to the new equation class. Here is a tutorial: Add button to FEM toolbar tutorial.