All translations

Enter a message name below to show all available translations.

Message

Found 5 translations.

NameCurrent message text
 h Deutsch (de)* Rest machining wurde reimplementiert, um Eingaben aus dem G-code früherer Arbeitsgänge aufzunehmen (anstatt die internen Inhalte von [[CAM_Area/de|Area]]-Arbeitsabläufen zu verwenden). Dies ermöglicht die Unterstützung von rest machining in Area-Arbeitsabläufen nach Nicht-Area-Arbeitsabläufen (most notably Adaptive). [https://github.com/FreeCAD/FreeCAD/pull/11939 Pull-Request #11939]
* G43-Werkzeughöhenausgleich (tool height compensation) wurde zum CAM-Post-Processor centroid hinzugefügt. [https://github.com/FreeCAD/FreeCAD/pull/12652 Pull-Request #12652]
* Eine Option ''Feed retract'' wurde zu den Eigenschaften der Bohrvorgänge für Reiben und Bohren hinzugefügt.[https://github.com/FreeCAD/FreeCAD/pull/13254 Pull-Request #13254]
* Ein neuer CAM-Simulator, der auf Low-level-OpenGL-Funktionen basiert (schneller und präziser), wurde hinzugefügt. [https://github.com/FreeCAD/FreeCAD/pull/13884 Pull-Request #13884]
* Der Vorgang [[CAM_Vcarve/de|VGravur]] wurde überarbeitet um Funktionen hinzuzufügen, die in anderer CAM-Software normalerweise vorhanden sind (Step down, Finishing pass, Head movement optimization und die Methode debugVoronoi), die es ermöglichen die Qualität der gravierten Oberfläche erheblich zu verbessern und gleichzeitig die Graviergeschwindigkeit um 50% zu steigern. [https://github.com/FreeCAD/FreeCAD/pull/14093 Pull request #14093]
* Maschinenfähige Material-Modelle wurden neben einigen Werkstoffen hinzugefügt. [https://github.com/FreeCAD/FreeCAD/pull/14460 Pull request #14460]
 h English (en)* Rest machining was reimplemented to take input from the G-code of earlier operations (instead of using the internals of [[CAM_Area|Area]] operations). This enables support for rest machining in Area operations after non-Area ones (most notably Adaptive). [https://github.com/FreeCAD/FreeCAD/pull/11939 Pull request #11939]
* G43 tool height compensation was added to the centroid CAM post-processor. [https://github.com/FreeCAD/FreeCAD/pull/12652 Pull request #12652]
* A ''Feed retract'' option was added to drilling operation settings for reaming and boring. [https://github.com/FreeCAD/FreeCAD/pull/13254 Pull request #13254]
* A new CAM simulator based on low-level OpenGL functions (faster and more precise) was added. [https://github.com/FreeCAD/FreeCAD/pull/13884 Pull request #13884]
* The [[CAM_Vcarve|Vcarve]] operation was reworked to include features commonly available in other CAM software (Step down, Finishing pass, Head movement optimization and debugVoronoi method) making it possible to drastically improve the carved surface quality while increasing the carving speed up to 50%. [https://github.com/FreeCAD/FreeCAD/pull/14093 Pull request #14093]
* Machinability material models were added along with a several materials. [https://github.com/FreeCAD/FreeCAD/pull/14460 Pull request #14460]
 h français (fr)* L'usinage au repos a été réimplémenté pour prendre en compte le G-code des opérations précédentes (au lieu d'utiliser les éléments internes des opérations de zone). Cela permet de prendre en charge l'usinage au repos dans les opérations de [[CAM_Area/fr|surface]] après les opérations de non surface (notamment Adaptive). [https://github.com/FreeCAD/FreeCAD/pull/11939 Pull request #11939]
* La compensation de la hauteur d'outil G43 a été ajoutée au post-processeur CAM centroïde. [https://github.com/FreeCAD/FreeCAD/pull/12652 Pull request #12652]
* Une option ''Retrait de l'avance'' a été ajoutée aux paramètres de l'opération de perçage pour l'alésage et le perçage. [https://github.com/FreeCAD/FreeCAD/pull/13254 Pull request #13254]
* Un nouveau simulateur CAM basé sur des fonctions OpenGL de bas niveau (plus rapide et plus précis) a été ajouté. [https://github.com/FreeCAD/FreeCAD/pull/13884 Pull request #13884]
* L'opération [[CAM_Vcarve/fr|Gravure en V]] a été retravaillée pour inclure des fonctions communément disponibles dans d'autres logiciels de FAO (Descente, Passe de finition, Optimisation du mouvement de la tête et Méthode débogage de Voronoï) permettant d'améliorer drastiquement la qualité de la surface sculptée tout en augmentant la vitesse de sculpture jusqu'à 50%. [https://github.com/FreeCAD/FreeCAD/pull/14093 Pull request #14093]
* Les modèles de matériaux d'usinabilité ont été ajoutés ainsi que plusieurs matériaux. [https://github.com/FreeCAD/FreeCAD/pull/14460 Pull request #14460]
 h italiano (it)* La lavorazione del materiale residuo (Rest machining) è stata reimplementata per prendere input dal  G-code delle operazioni precedenti (invece di utilizzare gli interni delle operazioni [[CAM_Area/it|Area]]). Ciò abilita il supporto per la lavorazione del materiale residuo nelle operazioni di area dopo quelle non di area (in particolare adattiva). [https://github.com/FreeCAD/FreeCAD/pull/11939 Pull request #11939]
* La compensazione dell'altezza utensile G43 è stata aggiunta al post-processore CAM del baricentro. [https://github.com/FreeCAD/FreeCAD/pull/12652 Pull request #12652]
* È stata aggiunta l'opzione "Feed retract" alle impostazioni delle operazioni di alesatura e foratura. [https://github.com/FreeCAD/FreeCAD/pull/13254 Pull request #13254]
* È stato aggiunto un nuovo simulatore CAM basato su funzioni OpenGL di basso livello (più veloce e preciso). [https://github.com/FreeCAD/FreeCAD/pull/13884 Pull request #13884]
* L'operazione [[CAM_Vcarve/it|Vcarve]] è stata rielaborata per includere funzionalità comunemente disponibili in altri software CAM (Step down, passaggio di finitura, ottimizzazione del movimento della testa e metodo debugVoronoi) rendendo possibile migliorare drasticamente la qualità della superficie scolpita aumentando la velocità di intaglio fino a 50%. [https://github.com/FreeCAD/FreeCAD/pull/14093 Pull request #14093]
* Sono stati aggiunti modelli di materiali lavorabili e diversi materiali. [https://github.com/FreeCAD/FreeCAD/pull/14460 Richiesta pull n. 14460]
 h polski (pl)* Obróbka spoczynkowa została ponownie zaimplementowana, aby pobierać dane wejściowe z G-code wcześniejszych operacji ''(zamiast używać wewnętrznych elementów operacji [[CAM_Area/pl|Obszar]])''. Umożliwia to obsługę obróbki spoczynkowej w operacjach Obszaru po operacjach nieobszarowych ''(w szczególności Adaptacyjnych)''. [https://github.com/FreeCAD/FreeCAD/pull/11939 Pull request #11939]
* Kompensacja wysokości narzędzia G43 została dodana do postprocesora CAM centroid. [https://github.com/FreeCAD/FreeCAD/pull/12652 Pull request #12652]
* Do ustawień operacji wiercenia dla rozwiercania i wytaczania dodano opcję "Cofania posuwu". [https://github.com/FreeCAD/FreeCAD/pull/13254 Pull request #13254]
* Dodano nowy symulator CAM oparty na niskopoziomowych funkcjach OpenGL ''(szybszy i bardziej precyzyjny)''. [https://github.com/FreeCAD/FreeCAD/pull/13884 Pull request #13884]
* Operacja [[CAM_Vcarve/pl|Wycięcie V]] została przebudowana aby uwzględniać funkcje powszechnie dostępne w innych środowiskach CAM (tzw. Step down, Finishing pass, Head movement optimization i metoda debugVoronoi), umożliwiając znaczne ulepszenie jakości powierzchni nacięcia przy jednoczesnym zwiększeniu prędkości operacji aż do 50%. [https://github.com/FreeCAD/FreeCAD/pull/14093 Pull request #14093]