All translations

Enter a message name below to show all available translations.

Message

Found 18 translations.

NameCurrent message text
 h български (bg)==Дефиниция на свойство на обект==
{{Property/bg}}
 h čeština (cs)==Definování vlastností==
 h Deutsch (de)==Eigenschaftentypen==
 h English (en)==Property types==
 h español (es)!!FUZZY!!== Definición de propiedad ==
A '''property''' is a piece of information like a number or a text string that is attached to a FreeCAD document or an object in a document. Properties can be viewed and modified with the [[Property editor]].

Properties play a very important part in FreeCAD, since it has been designed to work with parametric objects, which are objects defined only by their properties.

Custom [[scripted objects]] in FreeCAD can have properties of the following types:

{{Code|code=
 Boolean
 Float
 FloatList
 FloatConstraint
 Angle
 Distance
 Integer
 IntegerConstraint
 Percent
 Enumeration
 IntegerList
 String
 StringList
 Link
 LinkList
 Matrix
 Vector
 VectorList
 Placement
 PlacementLink
 Color
 ColorList
 Material
 Path
 File
 FileIncluded
 PartShape
 FilletContour
 Circle
}}


==Ejemplo de propiedades ==

There are two types of feature properties accessible through tabs at the bottom of the property editor:
: {{PropertyView|View}} : properties related to the "visual" display of an object.
: {{PropertyData|Data}} : properties related to the "physical" parameters of an object.

===View===


[[File:FreeCAD_Properties_View.png|490px|left]]
{{TitleProperty|Base}}

* {{PropertyView|Bounding Box}} : Indicates if a box showing the overall extent of the object is to be displayed. Value False, or True (Default, False).
* {{PropertyView|Control Point}} : Indicates if the feature control points are to be displayed.  Value False, or True (Default, False).
* {{PropertyView|Deviation}} : Sets the accuracy of the polygonal representation of the model in the 3d view (tessellation). Lower values = better quality. The value is in percent of object's size (deviation in mm = (w+h+d)/3*valueInPercent/100, where w,h,d are the bounding box dimensions).
* {{PropertyView|Display Mode}} :Display mode of the feature, '''Flat lines, Shaded, Wireframe, Points''' [[IMAGE:Vue_DisplayModePartDesign_fr_00.png|96px]]. (Default, '''Flat lines''').
* {{PropertyView|Lighting}} : Lighting '''One side, Two side''' [[IMAGE:Vue_Lighting_fr_00.png|96px]].  (Default, '''Two side''').
* {{PropertyView|Line Color}} : Gives the color of the line (edges) (Default, '''25, 25, 25''').
* {{PropertyView|Line Width}} : Gives the thickness of the line (edges) (Default, '''2''').
* {{PropertyView|Point Color}} : Gives the color of the points (ends of the feature) (Default, '''25, 25, 25''').
* {{PropertyView|Point Size}} : Gives the size of the points (Default, '''2''').
* {{PropertyView|Selectable}} : Allows selection of the feature. Value False, ou True (Default, True).
* {{PropertyView|Shape Color}} : Give the color shape (default, '''204, 204, 204''').
* {{PropertyView|Transparency}} : Sets the degree of transparency in the feature of '''0''' to '''100''' (Default, '''0''').
* {{PropertyView|Visibility}} : Determines the visibility of the feature (like the bar {{KEY|SPACE}}). Value False, or True (Default, True).
{{clear}}


===Data===


[[File:FreeCAD_Properties_Data.png|490px|left]]
{{TitleProperty|Base}}


{{PropertyData|Placement}}: Summary of the data below.
Every feature has a placement that can be controlled through the Data Properties table. It controls the placement of the part with respect to the coordinate system. NOTE: The placement properties do not affect the physical dimensions of the feature, but merely its position in space!<br>If you select the title '''Placement''' [[Image:Tache_Placement_01_fr_00.png|256px|Options Placement]], a button with {{KEY|three small points}} appears to the right. Clicking this button {{KEY| '''...'''}}, opens the '''[[Tasks_Placement|Tasks_Placement]]''' options window.


{{PropertyData|Angle}} :
Specifies the angle to be used with the [[#Axis|axis]] property (below). An angle is set here, and the axis that the angle acts upon is set with the axis property.
The feature is rotated by the specified angle, about the specified axis.
A usage example might be if you created a revolution feature as required, but then needed to rotate the whole feature by some amount, in order to allow it to line-up with another pre-existing feature.


{{PropertyData|Axis}} :
This property specifies the axis/axes about which the feature is to be rotated. The exact value of rotation comes from the angle property (above).
This property takes three arguments, which are passed as numbers in the x, y, and z boxes in the tool. Setting a value for more than one of the axes will cause the part to be rotated in each axis, by the angle value multiplied by the value for the axis.
For example, with an angle of 15° set, specifying a value of 1.0 for x, and 2.0 for y will cause the finished part to be rotated 15° in the x-axis AND 30° in the y-axis.


{{PropertyData|Position}} :
This property specifies the base point to which all dimensions refer. This takes three arguments, which are passed as numbers to the x, y, and z boxes in the tool. Setting a value for more than one of the boxes will cause the part to be translated by the number of units along the corresponding axis.


{{PropertyData|Label}} :
The Label is the name given to the object (feature), this name can be changed as desired.


{{clear}}
'''PS: The displayed properties can vary, depending on the tool used.'''
 h français (fr)==Types de propriétés==
 h hrvatski (hr)!!FUZZY!!==Property definition==
A '''property''' is a piece of information like a number or a text string that is attached to a FreeCAD document or an object in a document. Properties can be viewed and modified with the [[Property editor]].

Properties play a very important part in FreeCAD, since it has been designed to work with parametric objects, which are objects defined only by their properties.

Custom [[scripted objects]] in FreeCAD can have properties of the following types:

{{Code|code=
 Boolean
 Float
 FloatList
 FloatConstraint
 Angle
 Distance
 Integer
 IntegerConstraint
 Percent
 Enumeration
 IntegerList
 String
 StringList
 Link
 LinkList
 Matrix
 Vector
 VectorList
 Placement
 PlacementLink
 Color
 ColorList
 Material
 Path
 File
 FileIncluded
 PartShape
 FilletContour
 Circle
}}

==Example of Part object properties==
===Properties===


There are two types of feature properties accessible through tabs at the bottom of the property editor:
: {{PropertyView|View}} : properties related to the "visual" display of an object.
: {{PropertyData|Data}} : properties related to the "physical" parameters of an object.

===View===


[[File:FreeCAD_Properties_View.png|490px|left]]
{{TitleProperty|Base}}

* {{PropertyView|Bounding Box}} : Indicates if a box showing the overall extent of the object is to be displayed. Value False, or True (Default, False).
* {{PropertyView|Control Point}} : Indicates if the feature control points are to be displayed.  Value False, or True (Default, False).
* {{PropertyView|Deviation}} : Sets the accuracy of the polygonal representation of the model in the 3d view (tessellation). Lower values = better quality. The value is in percent of object's size (deviation in mm = (w+h+d)/3*valueInPercent/100, where w,h,d are the bounding box dimensions).
* {{PropertyView|Display Mode}} :Display mode of the feature, '''Flat lines, Shaded, Wireframe, Points''' [[IMAGE:Vue_DisplayModePartDesign_fr_00.png|96px]]. (Default, '''Flat lines''').
* {{PropertyView|Lighting}} : Lighting '''One side, Two side''' [[IMAGE:Vue_Lighting_fr_00.png|96px]].  (Default, '''Two side''').
* {{PropertyView|Line Color}} : Gives the color of the line (edges) (Default, '''25, 25, 25''').
* {{PropertyView|Line Width}} : Gives the thickness of the line (edges) (Default, '''2''').
* {{PropertyView|Point Color}} : Gives the color of the points (ends of the feature) (Default, '''25, 25, 25''').
* {{PropertyView|Point Size}} : Gives the size of the points (Default, '''2''').
* {{PropertyView|Selectable}} : Allows selection of the feature. Value False, ou True (Default, True).
* {{PropertyView|Shape Color}} : Give the color shape (default, '''204, 204, 204''').
* {{PropertyView|Transparency}} : Sets the degree of transparency in the feature of '''0''' to '''100''' (Default, '''0''').
* {{PropertyView|Visibility}} : Determines the visibility of the feature (like the bar {{KEY|SPACE}}). Value False, or True (Default, True).
{{clear}}


===Data===


[[File:FreeCAD_Properties_Data.png|490px|left]]
{{TitleProperty|Base}}


{{PropertyData|Placement}} :
Summary of the data below.
Every feature has a placement that can be controlled through the Data Properties table. It controls the placement of the part with respect to the coordinate system. NOTE: The placement properties do not affect the physical dimensions of the feature, but merely its position in space!<br>If you select the title '''Placement''' [[Image:Tache_Placement_01_fr_00.png|256px|Options Placement]], a button with {{KEY|three small points}} appears to the right. Clicking this button {{KEY| '''...'''}}, opens the '''[[Tasks_Placement|Tasks_Placement]]''' options window.


{{PropertyData|Angle}} :
Specifies the angle to be used with the [[#Axis|axis]] property (below). An angle is set here, and the axis that the angle acts upon is set with the axis property.
The feature is rotated by the specified angle, about the specified axis.
A usage example might be if you created a revolution feature as required, but then needed to rotate the whole feature by some amount, in order to allow it to line-up with another pre-existing feature.


{{PropertyData|Axis}} :
This property specifies the axis/axes about which the feature is to be rotated. The exact value of rotation comes from the angle property (above).
This property takes three arguments, which are passed as numbers in the x, y, and z boxes in the tool. Setting a value for more than one of the axes will cause the part to be rotated in each axis, by the angle value multiplied by the value for the axis.
For example, with an angle of 15° set, specifying a value of 1.0 for x, and 2.0 for y will cause the finished part to be rotated 15° in the x-axis AND 30° in the y-axis.


{{PropertyData|Position}} :
This property specifies the base point to which all dimensions refer. This takes three arguments, which are passed as numbers to the x, y, and z boxes in the tool. Setting a value for more than one of the boxes will cause the part to be translated by the number of units along the corresponding axis.


{{PropertyData|Label}} :
The Label is the name given to the object (feature), this name can be changed as desired.


{{clear}}
'''PS: The displayed properties can vary, depending on the tool used.'''
 h Bahasa Indonesia (id)!!FUZZY!!==Property definition==
A '''property''' is a piece of information like a number or a text string that is attached to a FreeCAD document or an object in a document. Properties can be viewed and modified with the [[Property editor]].

Properties play a very important part in FreeCAD, since it has been designed to work with parametric objects, which are objects defined only by their properties.

Custom [[scripted objects]] in FreeCAD can have properties of the following types:

{{Code|code=
 Boolean
 Float
 FloatList
 FloatConstraint
 Angle
 Distance
 Integer
 IntegerConstraint
 Percent
 Enumeration
 IntegerList
 String
 StringList
 Link
 LinkList
 Matrix
 Vector
 VectorList
 Placement
 PlacementLink
 Color
 ColorList
 Material
 Path
 File
 FileIncluded
 PartShape
 FilletContour
 Circle
}}

==Example of Part object properties==
===Properties===


There are two types of feature properties accessible through tabs at the bottom of the property editor:
: {{PropertyView|View}} : properties related to the "visual" display of an object.
: {{PropertyData|Data}} : properties related to the "physical" parameters of an object.

===View===


[[File:FreeCAD_Properties_View.png|490px|left]]
{{TitleProperty|Base}}

* {{PropertyView|Bounding Box}} : Indicates if a box showing the overall extent of the object is to be displayed. Value False, or True (Default, False).
* {{PropertyView|Control Point}} : Indicates if the feature control points are to be displayed.  Value False, or True (Default, False).
* {{PropertyView|Deviation}} : Sets the accuracy of the polygonal representation of the model in the 3d view (tessellation). Lower values = better quality. The value is in percent of object's size (deviation in mm = (w+h+d)/3*valueInPercent/100, where w,h,d are the bounding box dimensions).
* {{PropertyView|Display Mode}} :Display mode of the feature, '''Flat lines, Shaded, Wireframe, Points''' [[IMAGE:Vue_DisplayModePartDesign_fr_00.png|96px]]. (Default, '''Flat lines''').
* {{PropertyView|Lighting}} : Lighting '''One side, Two side''' [[IMAGE:Vue_Lighting_fr_00.png|96px]].  (Default, '''Two side''').
* {{PropertyView|Line Color}} : Gives the color of the line (edges) (Default, '''25, 25, 25''').
* {{PropertyView|Line Width}} : Gives the thickness of the line (edges) (Default, '''2''').
* {{PropertyView|Point Color}} : Gives the color of the points (ends of the feature) (Default, '''25, 25, 25''').
* {{PropertyView|Point Size}} : Gives the size of the points (Default, '''2''').
* {{PropertyView|Selectable}} : Allows selection of the feature. Value False, ou True (Default, True).
* {{PropertyView|Shape Color}} : Give the color shape (default, '''204, 204, 204''').
* {{PropertyView|Transparency}} : Sets the degree of transparency in the feature of '''0''' to '''100''' (Default, '''0''').
* {{PropertyView|Visibility}} : Determines the visibility of the feature (like the bar {{KEY|SPACE}}). Value False, or True (Default, True).
{{clear}}


===Data===


[[File:FreeCAD_Properties_Data.png|490px|left]]
{{TitleProperty|Base}}


{{PropertyData|Placement}} :
Summary of the data below.
Every feature has a placement that can be controlled through the Data Properties table. It controls the placement of the part with respect to the coordinate system. NOTE: The placement properties do not affect the physical dimensions of the feature, but merely its position in space!<br>If you select the title '''Placement''' [[Image:Tache_Placement_01_fr_00.png|256px|Options Placement]], a button with {{KEY|three small points}} appears to the right. Clicking this button {{KEY| '''...'''}}, opens the '''[[Tasks_Placement|Tasks_Placement]]''' options window.


{{PropertyData|Angle}} :
Specifies the angle to be used with the [[#Axis|axis]] property (below). An angle is set here, and the axis that the angle acts upon is set with the axis property.
The feature is rotated by the specified angle, about the specified axis.
A usage example might be if you created a revolution feature as required, but then needed to rotate the whole feature by some amount, in order to allow it to line-up with another pre-existing feature.


{{PropertyData|Axis}} :
This property specifies the axis/axes about which the feature is to be rotated. The exact value of rotation comes from the angle property (above).
This property takes three arguments, which are passed as numbers in the x, y, and z boxes in the tool. Setting a value for more than one of the axes will cause the part to be rotated in each axis, by the angle value multiplied by the value for the axis.
For example, with an angle of 15° set, specifying a value of 1.0 for x, and 2.0 for y will cause the finished part to be rotated 15° in the x-axis AND 30° in the y-axis.


{{PropertyData|Position}} :
This property specifies the base point to which all dimensions refer. This takes three arguments, which are passed as numbers to the x, y, and z boxes in the tool. Setting a value for more than one of the boxes will cause the part to be translated by the number of units along the corresponding axis.


{{PropertyData|Label}} :
The Label is the name given to the object (feature), this name can be changed as desired.


{{clear}}
'''PS: The displayed properties can vary, depending on the tool used.'''
 h italiano (it)==Tipi di proprietà==
 h polski (pl)==Typy właściwości==
 h português (pt)!!FUZZY!!==Property Definition==
A '''property''' is a piece of information like a number or a text string that is attached to a FreeCAD document or an object in a document. Properties can be viewed and modified with the [[Property editor]].

Properties play a very important part in FreeCAD, since it has been designed to work with parametric objects, which are objects defined only by their properties.

Custom [[scripted objects]] in FreeCAD can have properties of the following types:

{{Code|code=
 Boolean
 Float
 FloatList
 FloatConstraint
 Angle
 Distance
 Integer
 IntegerConstraint
 Percent
 Enumeration
 IntegerList
 String
 StringList
 Link
 LinkList
 Matrix
 Vector
 VectorList
 Placement
 PlacementLink
 Color
 ColorList
 Material
 Path
 File
 FileIncluded
 PartShape
 FilletContour
 Circle
}}


==Example of Part object properties==

===Properties===


There are two types of feature properties accessible through tabs at the bottom of the property editor:
: {{PropertyView|View}} : properties related to the "visual" display of an object.
: {{PropertyData|Data}} : properties related to the "physical" parameters of an object.

===View===


[[File:FreeCAD_Properties_View.png|490px|left]]
{{TitleProperty|Base}}

* {{PropertyView|Bounding Box}} : Indicates if a box showing the overall extent of the object is to be displayed. Value False, or True (Default, False).
* {{PropertyView|Control Point}} : Indicates if the feature control points are to be displayed.  Value False, or True (Default, False).
* {{PropertyView|Deviation}} : Sets the accuracy of the polygonal representation of the model in the 3d view (tessellation). Lower values = better quality. The value is in percent of object's size (deviation in mm = (w+h+d)/3*valueInPercent/100, where w,h,d are the bounding box dimensions).
* {{PropertyView|Display Mode}} :Display mode of the feature, '''Flat lines, Shaded, Wireframe, Points''' [[IMAGE:Vue_DisplayModePartDesign_fr_00.png|96px]]. (Default, '''Flat lines''').
* {{PropertyView|Lighting}} : Lighting '''One side, Two side''' [[IMAGE:Vue_Lighting_fr_00.png|96px]].  (Default, '''Two side''').
* {{PropertyView|Line Color}} : Gives the color of the line (edges) (Default, '''25, 25, 25''').
* {{PropertyView|Line Width}} : Gives the thickness of the line (edges) (Default, '''2''').
* {{PropertyView|Point Color}} : Gives the color of the points (ends of the feature) (Default, '''25, 25, 25''').
* {{PropertyView|Point Size}} : Gives the size of the points (Default, '''2''').
* {{PropertyView|Selectable}} : Allows selection of the feature. Value False, ou True (Default, True).
* {{PropertyView|Shape Color}} : Give the color shape (default, '''204, 204, 204''').
* {{PropertyView|Transparency}} : Sets the degree of transparency in the feature of '''0''' to '''100''' (Default, '''0''').
* {{PropertyView|Visibility}} : Determines the visibility of the feature (like the bar {{KEY|SPACE}}). Value False, or True (Default, True).
{{clear}}


===Data===


[[File:FreeCAD_Properties_Data.png|490px|left]]
{{TitleProperty|Base}}


{{PropertyData|Placement}} :
Summary of the data below.
Every feature has a placement that can be controlled through the Data Properties table. It controls the placement of the part with respect to the coordinate system. NOTE: The placement properties do not affect the physical dimensions of the feature, but merely its position in space!<br>If you select the title '''Placement''' [[Image:Tache_Placement_01_fr_00.png|256px|Options Placement]], a button with {{KEY|three small points}} appears to the right. Clicking this button {{KEY| '''...'''}}, opens the '''[[Tasks_Placement|Tasks_Placement]]''' options window.


{{PropertyData|Angle}} :
Specifies the angle to be used with the [[#Axis|axis]] property (below). An angle is set here, and the axis that the angle acts upon is set with the axis property.
The feature is rotated by the specified angle, about the specified axis.
A usage example might be if you created a revolution feature as required, but then needed to rotate the whole feature by some amount, in order to allow it to line-up with another pre-existing feature.


{{PropertyData|Axis}} :
This property specifies the axis/axes about which the feature is to be rotated. The exact value of rotation comes from the angle property (above).
This property takes three arguments, which are passed as numbers in the x, y, and z boxes in the tool. Setting a value for more than one of the axes will cause the part to be rotated in each axis, by the angle value multiplied by the value for the axis.
For example, with an angle of 15° set, specifying a value of 1.0 for x, and 2.0 for y will cause the finished part to be rotated 15° in the x-axis AND 30° in the y-axis.


{{PropertyData|Position}} :
This property specifies the base point to which all dimensions refer. This takes three arguments, which are passed as numbers to the x, y, and z boxes in the tool. Setting a value for more than one of the boxes will cause the part to be translated by the number of units along the corresponding axis.


{{PropertyData|Label}} :
The Label is the name given to the object (feature), this name can be changed as desired.


{{clear}}
'''PS: The displayed properties can vary, depending on the tool used.'''
 h português do Brasil (pt-br)==Tipos de propriedade==
 h română (ro)==Property definition==
A '''property''' is a piece of information like a number or a text string that is attached to a FreeCAD document or an object in a document. Properties can be viewed and modified with the [[Property editor]].
 h русский (ru)==Типы свойств==
 h svenska (sv)!!FUZZY!!== Property definition ==
A '''property''' is a piece of information like a number or a text string that is attached to a FreeCAD document or an object in a document. Properties can be viewed and modified with the [[Property editor]].

Properties play a very important part in FreeCAD, since it has been designed to work with parametric objects, which are objects defined only by their properties.

Custom [[scripted objects]] in FreeCAD can have properties of the following types:

{{Code|code=
 Boolean
 Float
 FloatList
 FloatConstraint
 Angle
 Distance
 Integer
 IntegerConstraint
 Percent
 Enumeration
 IntegerList
 String
 StringList
 Link
 LinkList
 Matrix
 Vector
 VectorList
 Placement
 PlacementLink
 Color
 ColorList
 Material
 Path
 File
 FileIncluded
 PartShape
 FilletContour
 Circle
}}


==Example of Part object properties ==
===Properties===

There are two types of feature properties accessible through tabs at the bottom of the property editor:
: {{PropertyView|View}} : properties related to the "visual" display of an object.
: {{PropertyData|Data}} : properties related to the "physical" parameters of an object.

===View===


[[File:FreeCAD_Properties_View.png|490px|left]]
{{TitleProperty|Base}}

* {{PropertyView|Bounding Box}} : Indicates if a box showing the overall extent of the object is to be displayed. Value False, or True (Default, False).
* {{PropertyView|Control Point}} : Indicates if the feature control points are to be displayed.  Value False, or True (Default, False).
* {{PropertyView|Deviation}} : Sets the accuracy of the polygonal representation of the model in the 3d view (tessellation). Lower values = better quality. The value is in percent of object's size (deviation in mm = (w+h+d)/3*valueInPercent/100, where w,h,d are the bounding box dimensions).
* {{PropertyView|Display Mode}} :Display mode of the feature, '''Flat lines, Shaded, Wireframe, Points''' [[IMAGE:Vue_DisplayModePartDesign_fr_00.png|96px]]. (Default, '''Flat lines''').
* {{PropertyView|Lighting}} : Lighting '''One side, Two side''' [[IMAGE:Vue_Lighting_fr_00.png|96px]].  (Default, '''Two side''').
* {{PropertyView|Line Color}} : Gives the color of the line (edges) (Default, '''25, 25, 25''').
* {{PropertyView|Line Width}} : Gives the thickness of the line (edges) (Default, '''2''').
* {{PropertyView|Point Color}} : Gives the color of the points (ends of the feature) (Default, '''25, 25, 25''').
* {{PropertyView|Point Size}} : Gives the size of the points (Default, '''2''').
* {{PropertyView|Selectable}} : Allows selection of the feature. Value False, ou True (Default, True).
* {{PropertyView|Shape Color}} : Give the color shape (default, '''204, 204, 204''').
* {{PropertyView|Transparency}} : Sets the degree of transparency in the feature of '''0''' to '''100''' (Default, '''0''').
* {{PropertyView|Visibility}} : Determines the visibility of the feature (like the bar {{KEY|SPACE}}). Value False, or True (Default, True).
{{clear}}


===Data===


[[File:FreeCAD_Properties_Data.png|490px|left]]
{{TitleProperty|Base}}


{{PropertyData|Placement}} :
Summary of the data below.
Every feature has a placement that can be controlled through the Data Properties table. It controls the placement of the part with respect to the coordinate system. NOTE: The placement properties do not affect the physical dimensions of the feature, but merely its position in space!<br>If you select the title '''Placement''' [[Image:Tache_Placement_01_fr_00.png|256px|Options Placement]], a button with {{KEY|three small points}} appears to the right. Clicking this button {{KEY| '''...'''}}, opens the '''[[Tasks_Placement|Tasks_Placement]]''' options window.


{{PropertyData|Angle}} :
Specifies the angle to be used with the [[#Axis|axis]] property (below). An angle is set here, and the axis that the angle acts upon is set with the axis property.
The feature is rotated by the specified angle, about the specified axis.
A usage example might be if you created a revolution feature as required, but then needed to rotate the whole feature by some amount, in order to allow it to line-up with another pre-existing feature.


{{PropertyData|Axis}} :
This property specifies the axis/axes about which the feature is to be rotated. The exact value of rotation comes from the angle property (above).
This property takes three arguments, which are passed as numbers in the x, y, and z boxes in the tool. Setting a value for more than one of the axes will cause the part to be rotated in each axis, by the angle value multiplied by the value for the axis.
For example, with an angle of 15° set, specifying a value of 1.0 for x, and 2.0 for y will cause the finished part to be rotated 15° in the x-axis AND 30° in the y-axis.


{{PropertyData|Position}} :
This property specifies the base point to which all dimensions refer. This takes three arguments, which are passed as numbers to the x, y, and z boxes in the tool. Setting a value for more than one of the boxes will cause the part to be translated by the number of units along the corresponding axis.


{{PropertyData|Label}} :
The Label is the name given to the object (feature), this name can be changed as desired.


{{clear}}
'''PS: The displayed properties can vary, depending on the tool used.'''
 h Türkçe (tr)==Özellik tanımı==
{{Property/tr}}

==Örnek olarak bir parça'nın özellikleri==
örnek yenilenecekmiş.
 h українська (uk)!!FUZZY!!==Property definition==
A '''property''' is a piece of information like a number or a text string that is attached to a FreeCAD document or an object in a document. Properties can be viewed and modified with the [[Property editor]].

Properties play a very important part in FreeCAD, since it has been designed to work with parametric objects, which are objects defined only by their properties.

Custom [[scripted objects]] in FreeCAD can have properties of the following types:

{{Code|code=
 Boolean
 Float
 FloatList
 FloatConstraint
 Angle
 Distance
 Integer
 IntegerConstraint
 Percent
 Enumeration
 IntegerList
 String
 StringList
 Link
 LinkList
 Matrix
 Vector
 VectorList
 Placement
 PlacementLink
 Color
 ColorList
 Material
 Path
 File
 FileIncluded
 PartShape
 FilletContour
 Circle
}}

==Example of Part object properties==
===Properties===


There are two types of feature properties accessible through tabs at the bottom of the property editor:
: {{PropertyView|View}} : properties related to the "visual" display of an object.
: {{PropertyData|Data}} : properties related to the "physical" parameters of an object.

===View===


[[File:FreeCAD_Properties_View.png|490px|left]]
{{TitleProperty|Base}}

* {{PropertyView|Bounding Box}} : Indicates if a box showing the overall extent of the object is to be displayed. Value False, or True (Default, False).
* {{PropertyView|Control Point}} : Indicates if the feature control points are to be displayed.  Value False, or True (Default, False).
* {{PropertyView|Deviation}} : Sets the accuracy of the polygonal representation of the model in the 3d view (tessellation). Lower values = better quality. The value is in percent of object's size (deviation in mm = (w+h+d)/3*valueInPercent/100, where w,h,d are the bounding box dimensions).
* {{PropertyView|Display Mode}} :Display mode of the feature, '''Flat lines, Shaded, Wireframe, Points''' [[IMAGE:Vue_DisplayModePartDesign_fr_00.png|96px]]. (Default, '''Flat lines''').
* {{PropertyView|Lighting}} : Lighting '''One side, Two side''' [[IMAGE:Vue_Lighting_fr_00.png|96px]].  (Default, '''Two side''').
* {{PropertyView|Line Color}} : Gives the color of the line (edges) (Default, '''25, 25, 25''').
* {{PropertyView|Line Width}} : Gives the thickness of the line (edges) (Default, '''2''').
* {{PropertyView|Point Color}} : Gives the color of the points (ends of the feature) (Default, '''25, 25, 25''').
* {{PropertyView|Point Size}} : Gives the size of the points (Default, '''2''').
* {{PropertyView|Selectable}} : Allows selection of the feature. Value False, ou True (Default, True).
* {{PropertyView|Shape Color}} : Give the color shape (default, '''204, 204, 204''').
* {{PropertyView|Transparency}} : Sets the degree of transparency in the feature of '''0''' to '''100''' (Default, '''0''').
* {{PropertyView|Visibility}} : Determines the visibility of the feature (like the bar {{KEY|SPACE}}). Value False, or True (Default, True).
{{clear}}


===Data===


[[File:FreeCAD_Properties_Data.png|490px|left]]
{{TitleProperty|Base}}


{{PropertyData|Placement}} :
Summary of the data below.
Every feature has a placement that can be controlled through the Data Properties table. It controls the placement of the part with respect to the coordinate system. NOTE: The placement properties do not affect the physical dimensions of the feature, but merely its position in space!<br>If you select the title '''Placement''' [[Image:Tache_Placement_01_fr_00.png|256px|Options Placement]], a button with {{KEY|three small points}} appears to the right. Clicking this button {{KEY| '''...'''}}, opens the '''[[Tasks_Placement|Tasks_Placement]]''' options window.


{{PropertyData|Angle}} :
Specifies the angle to be used with the [[#Axis|axis]] property (below). An angle is set here, and the axis that the angle acts upon is set with the axis property.
The feature is rotated by the specified angle, about the specified axis.
A usage example might be if you created a revolution feature as required, but then needed to rotate the whole feature by some amount, in order to allow it to line-up with another pre-existing feature.


{{PropertyData|Axis}} :
This property specifies the axis/axes about which the feature is to be rotated. The exact value of rotation comes from the angle property (above).
This property takes three arguments, which are passed as numbers in the x, y, and z boxes in the tool. Setting a value for more than one of the axes will cause the part to be rotated in each axis, by the angle value multiplied by the value for the axis.
For example, with an angle of 15° set, specifying a value of 1.0 for x, and 2.0 for y will cause the finished part to be rotated 15° in the x-axis AND 30° in the y-axis.


{{PropertyData|Position}} :
This property specifies the base point to which all dimensions refer. This takes three arguments, which are passed as numbers to the x, y, and z boxes in the tool. Setting a value for more than one of the boxes will cause the part to be translated by the number of units along the corresponding axis.


{{PropertyData|Label}} :
The Label is the name given to the object (feature), this name can be changed as desired.


{{clear}}
'''PS: The displayed properties can vary, depending on the tool used.'''
 h 中文(中国大陆) (zh-cn)==属性定义==
一个'''属性'''是一条信息,如一个数字或文本字符串,附加到一个FreeCAD文档或文档中的一个对象。可以使用属性编辑器修改属性,如果允许的话。