All translations

Enter a message name below to show all available translations.

Message

Found 3 translations.

NameCurrent message text
 h English (en)# Double click '''Sketch002''' to enter edit mode.
# Rotate the view so you can clearly see the points as shown in '''Fig: CC2'''. This will ease subsequent steps. Note that the rectangle's initial position may be different in your sketch. 
# Click [[File:Sketcher_External.svg|24px|link=Sketcher_External]] [[Sketcher_External|External geometry]].
# While the tool is active the cursor has this appearance:<br>[[File:Pd_tut_eg_cursor.png]]
# Select point '''P1''' in '''Fig: CC2'''. The selected point is added to the sketch as external geometry. In the '''Elements''' section of the task panel it will appear with a purple X icon or, {{Version|0.21}}, a purple dot icon.
# With the tool still active select point '''P2''' in '''Fig: CC2'''. This external geometry should also appear in the '''Elements''' section.
# Exit the tool.
# Select point '''P1''' and point '''P3''' and apply a [[File:Sketcher_ConstrainVertical.svg|24px|link=Sketcher_ConstrainVertical]] [[Sketcher_ConstrainVertical|Vertical constraint]]. The rectangle will be aligned with the X position of '''P1'''.
# Select point '''P2''' and point '''P3''' and apply a [[File:Sketcher_ConstrainHorizontal.svg|24px|link=Sketcher_ConstrainHorizontal]] [[Sketcher_ConstrainHorizontal|Horizontal constraint]]. The rectangle will be aligned with the Y position of '''P2'''. 
# You should have a fully constrained sketch similar to '''Fig: CC3'''.
 h français (fr)# Double-cliquez sur '''Sketch002''' pour entrer en mode d'édition.
# Faites pivoter la vue de manière à voir clairement les points comme indiqué sur la '''Fig : CC2'''. Cela facilitera les étapes suivantes. Notez que la position initiale du rectangle peut être différente dans votre esquisse. 
# Cliquez sur [[File:Sketcher_External.svg|24px|link=Sketcher_External/fr]] [[Sketcher_External/fr|Géométrie externe]].
# Lorsque l'outil est actif, le curseur a cette apparence :<br>[[File:Pd_tut_eg_cursor.png]]
# Sélectionnez le point '''P1''' dans '''Fig : CC2'''. Le point sélectionné est ajouté à l'esquisse en tant que géométrie externe. Dans la section '''Éléments''' du panneau des tâches, il apparaît sous la forme d'une icône X violette ou, {{Version/fr|0.21}}, d'une icône de point violette.
# Avec l'outil toujours actif, sélectionnez le point '''P2''' dans la '''Fig : CC2'''. Cette géométrie externe devrait également apparaître dans la section '''Elements'''.
# Quittez l'outil.
# Sélectionnez le point '''P1''' et le point '''P3''' et appliquez un [[File:Sketcher_ConstrainVertical.svg|24px|link=Sketcher_ConstrainVertical/fr]] [[Sketcher_ConstrainVertical/fr|Contrainte verticale]]. Le rectangle sera aligné avec la position X de '''P1'''.
# Sélectionnez le point '''P2''' et le point '''P3''' et appliquez une [[File:Sketcher_ConstrainHorizontal.svg|24px|link=Sketcher_ConstrainHorizontal/fr]] [[Sketcher_ConstrainHorizontal/fr|Contrainte horizontale]]. Le rectangle sera aligné avec la position Y de '''P2'''. 
# Vous devriez obtenir une esquisse entièrement contrainte semblable à la '''Fig : CC3'''.
 h polski (pl)# Kliknij dwukrotnie '''Sketch002''', aby wejść w tryb edycji.
# Obróć widok tak, aby wyraźnie widzieć punkty, jak pokazano na '''Rys: CC2'''. Ułatwi to kolejne kroki. Zauważ, że początkowe położenie prostokąta może być inne w Twoim szkicu. 
# Kliknij narzędzie [[File:Sketcher_External.svg|24px|link=Sketcher_External/pl]] [[Sketcher_External/pl|Geometria zewnętrzna]].
# Podczas gdy narzędzie jest aktywne kursor ma następujący wygląd:<br>[[File:Pd_tut_eg_cursor.png]]
# Wybierz punkt '''P1''' w '''Rys: CC2'''. Wybrany punkt zostaje dodany do szkicu jako geometria zewnętrzna. Będzie on wyświetlany w sekcji '''Elementy''' w panelu zadań z fioletową ikoną X lub, {{Version/pl|0.21}}, ikoną fioletowej kropki.
# Mając wciąż aktywne narzędzie wybierz punkt '''P2''' na '''Rys: CC2'''. Ta zewnętrzna geometria powinna również pojawić się w sekcji '''Elementy'''.
# Zakończ pracę z narzędziem.
# Wybierz punkt '''P1''' i punkt '''P3''' i zastosuj [[File:Sketcher_ConstrainVertical.svg|24px|link=Sketcher_ConstrainVertical/pl]] [[Sketcher_ConstrainVertical/pl|zwiąż odległość pionową]]. Prostokąt zostanie wyrównany do pozycji X punktu '''P1'''.
# Wybierz punkt '''P2''' i punkt '''P3''' i zastosuj [[File:Sketcher_ConstrainHorizontal.svg|24px|link=Sketcher_ConstrainHorizontal/pl]] [[Sketcher_ConstrainHorizontal/pl|zwiąż odległość poziomą]]. Prostokąt zostanie wyrównany do pozycji Y '''P2'''. 
# Twój szkic powinien być w pełni związany, tak jak na '''Rys. CC3'''.