Translations:PartDesign AdditiveHelix/7/en

From FreeCAD Documentation
Revision as of 14:45, 25 February 2021 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Select the sketch to be swept into a helix. A face on the existing solid can alternatively be used.
  2. Press the AdditiveHelix button.
  3. Set the Helix parameters (see next section).
  4. Inspect the Helix in the view window, to ensure that the parameters do not result in a self intersecting helix.
  5. Press OK.