Path: Profile

From FreeCAD Documentation
Revision as of 20:43, 29 October 2018 by Luc (talk | contribs)

Path Profile

Menu location
Path → New Operation → Profile
Workbenches
Path
Default shortcut
P,P
Introduced in version
-
See also
None

Descriere

Instrumentul Contur creează o simplă tăiere a conturului exterior al obiectelor 3D complexe Part. Întregul model de lucru servește ca intrare la Operație, indiferent dacă geometria corpului este selectată atunci când este apelată comanda Contour. Un punct de pornire poate fi activat din editorul de operațiuni, utilizând o locație definită în Property view->Start Points.

Utilizare

  1. Select a face on a Part-based object. Alternatively, also select a starting edge on that face.
  2. Press the Profile button
  3. Adjust the desired properties

Opţiuni

  • Obiectul Profilului de Traiectorie este creat ca făcând parte dintr-o operație Path Job. Pentru a configura corect profilul, trebuie să existe o magazie de scule în obiectul mașinii proiectului și o comandă Tool Change trebuie plasat înaintea profilului.

Proprietăți

  • DateActive: Make False, to prevent operation from generating code
  • DateUse Placements: make True, if using the profile operation placement properties to transform toolpath in post processor
  • DateTool Controller: The Tool controller specifies the index of the Tool to use

Depth Properties

  • DateStart Depth: Starting Depth of Tool- first cut depth in Z
  • DateFinal Depth: Final Depth of Tool- lowest value in Z
  • DateStep Down: Incremental Step Down of Tool


Height Properties

  • DateSafe Height: The above which Rapid motions are allowed.
  • DateClearance Height: The height needed to clear clamps and obstructions



Operation Properties

  • DateTool Controller: Defines the Tool controller used in the Operation
  • DateDirection: Specifies a CW or CCW path for the External contour cut
  • DateUse Start Point: make True, if manually specifying a Start Point, then enter Start Points in the Property data Start Points field

Start Point Properties

  • DateStart Point: The start point of this path
  • DateUse Start Point: make True, if specifying a Start Point
  • DateExtend At Start: extra length of tool path before start of part edge
  • DateLeadIn Line Len: length of straight segment of toolpath that comes in at angle to first part edge

End Point Properties

  • DateUse End Point: make True, if specifying an End Point
  • DateExtend At End: extra length of tool path after end of part edge
  • DateLeadOut LineLen: length of straight segment of toolpath that comes in at angle to last part edge
  • DateEnd Point: The end point of this path

Profile Properties

  • Date Side: Partea marginii care urmează a fi tăiată
  • Date Direction: Directia ca traiectoria sculei ar trebui sa ia in jurul materialului, orara sau antiorar, ClockWise CW sau CounterClockWise CCW
  • Date RollRadius: Raza de început și de sfârșit
  • Date OffsetExtra: valoare suplimentară pentru a rămâne în afara profilului final - pentru a asigura o traiectorie laterală a sculei
  • Date SegLen: Valoarea (mozaicarea poligoanelor de discretizare)/tessellation pentru valorile căilor de unelte realizate din curbele bezzier, b-splinestele și elipsele