Drawing Orthoviews
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
|
Menu location |
---|
Drawing → Insert orthographic views |
Workbenches |
Drawing, Complete |
Default shortcut |
none |
Introduced in version |
- |
See also |
Drawing Landscape A3 |
This tool inserts an orthographic projection of the selected object in the active drawing sheet.
How to use
- Select a feature in the model tree
- Press the
Insert orthographic views button
- In the Combo View, select the projection type
- If desired, select an alternative View from: location
- If desired, select an axis that will be on the right side of the view
- Select any secondary views you would like to be projected from the main view
- If you wish to change the scale of the views, the location of the primary view, or the spacing of the secondary views, deselect Auto scale / position
- Enter the scale for the views
- Set the offset of the upper left view from the upper left corner of the drawing (in mm)
- Set the spacing between the origins of each view in the x and y directions.
- Select Show hidden lines to have hidden lines displayed
- Select Show smooth lines to show lines where curvature is discontinuous (e.g. at the edge of a fillet)
- Click OK to create the view
Options
To be added
Properties
To be added
Scripting
To be added
Limitations
To be added
Tutorials
To be added