Draft: Aggancia Punto Medio
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
Punto centrale |
Posizione nel menu |
---|
Draft → Snap → Punto centrale |
Ambiente |
Draft, Arch |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Nessuno |
Descrizione
Questa modalità di aggancio consente di selezionare i punti medi degli elementi.
Use
- Make sure snap mode is turned on
- Choose element to be inserted into the FreeCAD-document
- Move cursor near the midpoint of the element you wish to attach your element to
- below on the right side of the cursor the symbol of the snap mode will appear
- click to attach your element to the selected endpoint of target element
Notes
Snap mode can be used with
- sketcher elements (lines, arcs)
- draft elements (DWires, Lines, Arcs)
- edges of shapes
- edges of solids
Clicking on the snap-mode icon will toggle the snap mode on/off.