Draft Midpoint

From FreeCAD Documentation
Revision as of 11:04, 29 November 2018 by Luc (talk | contribs) (Created page with "=== Descripción === Este modo de ajuste te permite seleccionar el punto medio de los elementos.")

Draft Midpoint

Menu location
Draft → Snap → Midpoint
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap


Descripción

Este modo de ajuste te permite seleccionar el punto medio de los elementos.


Use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document
  3. Move cursor near the midpoint of the element you wish to attach your element to
  4. below on the right side of the cursor the symbol of the snap mode will appear
  5. click to attach your element to the selected endpoint of target element


Notes

Snap mode can be used with

  • sketcher elements (lines, arcs)
  • draft elements (DWires, Lines, Arcs)
  • edges of shapes
  • edges of solids

Clicking on the snap-mode icon will toggle the snap mode on/off.