Arch Barra de Refuerzo Doblada
Arch Rebar BentShape |
Menu location |
---|
Arch → Rebar tools |
Workbenches |
Arch |
Default shortcut |
None |
See also |
Stirrup |
This command is part of the Reinforcement AddOn, that you can install via menu Tools → Addons Manager |
Descripción
La herramienta Bent Shape Rebar permite al usuario crear una barra de refuerzo de forma doblada en el elemento estructural.
Como utilizar
- Crear un elemento structure
- Seleccione cualquier cara de la estructura
- Luego seleccione Bent Shape Rebar desde las herramientas de la barra de refuerzo
- Aparecerá un panel de tareas en el lado izquierdo de la pantalla como se muestra a continuación
- Seleccione la orientación deseada
- Proporcione las entradas como cubierta frontal, cubierta izquierda, cubierta derecha, cubierta inferior, cubierta superior, longitud de anclaje, ángulo doblado, redondeado y diámetro de la barra de refuerzo
- Seleccione el modo de distribución, ya sea cantidad o espaciado
- Si se selecciona el espaciado, un usuario también puede optar por espaciado personalizado
- La selección de la cara seleccionada se usa para verificar o cambiar la cara de la distribución de barras de refuerzo
- Haga clic en OK o Apply para generar las barras de refuerzo
- Haga clic en Cancel para salir del panel de tareas
Properties
- DatosOrientation: It decides the orientation of the rebar (like a bottom, top, right and left).
- DatosFront Cover: The distance between rebar and selected face.
- DatosLeft Cover: The distance between the left end of the rebar to the left face of the structure.
- DatosRight Cover: The distance between the right end of the rebar to right face of the structure.
- DatosBottom Cover: The distance between rebar from the bottom face of the structure.
- DatosTop Cover: The distance between rebar from the top face of the structure.
- DatosAnchor Length: It is the arm's length of bent shape rebar.
- DatosBent Angle: It decides angle in bent shape rebar.
- DatosAmount: The amount of rebars.
- DatosSpacing: The distance between the axes of each bar.
Scripting
The Bent Shape Rebar tool can by used in macros and from the python console by using the following function:
makeBentShapeRebar(FrontCover, BottomCover, LeftCover, RightCover, Diameter, TopCover, BentLength, BentAngle, Rounding, AmountSpacingCheck, AmountSpacingValue, Orientation, Structure, Facename)
- The Bent Shape Rebar have four different orientations:
- Bottom
- Top
- Left
- Right
- Adds a Bent Shape reinforcing bar object to the given structural object.
- If no Structure and Facename is given, it will take user selected face as input.
- Here CoverAlong argument is having type tuple.
- Returns the new Rebar object.
Example: Creating Bent Shape rebar.
import Arch, BentShapeRebar
structure = Arch.makeStructure(length=1000.0, width=1000.0, height=100.0)
structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
rebar = BentShapeRebar.makeBentShapeRebar(20, 20, 20, 20, 8, 20, 100, 135, 2, True, 10, "Bottom", structure, "Face1")
Changing properties of Bent Shape rebar.
import BentShapeRebar
BentShapeRebar.editBentShapeRebar(rebar, 50, 50, 50, 50, 12, 20, 100, 135, 2, True, 10, "Top")