Дополнительные python модули
This page lists several additional python modules or other pieces of software that can be downloaded freely from the internet, and add functionality to your FreeCAD installation.
PySide (previously PyQt4)
- homepage (PySide): http://qt-project.org/wiki/PySide
- license: LGPL
- optional, but needed by several modules: Draft, Arch, Ship, Plot, OpenSCAD, Spreadsheet
PySide (previously PyQt) is required by several modules of FreeCAD to access FreeCAD's Qt interface. It is already bundled in the windows verison of FreeCAD, and is usually installed automatically by FreeCAD on Linux, when installing from official repositories. If those modules (Draft, Arch, etc) are enabled after FreeCAD is installed, it means PySide (previously PyQt) is already there, and you don't need to do anything more.
Note: FreeCAD progressively moved away from PyQt after version 0.13, in favour of PySide, which does exactly the same job but has a license (LGPL) more compatible with FreeCAD.
Installation
Linux
The simplest way to install PySide is through your distribution's package manager. On Debian/Ubuntu systems, the package name is generally python-PySide, while on RPM-based systems it is named pyside. The necessary dependencies (Qt and SIP) will be taken care of automatically.
Windows
The program can be downloaded from http://qt-project.org/wiki/Category:LanguageBindings::PySide::Downloads . You'll need to install the Qt and SIP libraries before installing PySide (to be documented).
MacOSX
PyQt on Mac can be installed via homebrew or port. See CompileOnMac#Install_Dependencies for more information.
Usage
Once it is installed, you can check that everything is working by typing in FreeCAD python console:
import PySide
To access the FreeCAD interface, type :
from PySide import QtCore,QtGui
FreeCADWindow = FreeCADGui.getMainWindow()
Now you can start to explore the interface with the dir() command. You can add new elements, like a custom widget, with commands like :
FreeCADWindow.addDockWidget(QtCore.Qt.RghtDockWidgetArea,my_custom_widget)
Working with Unicode :
text = text.encode('utf-8')
Working with QFileDialog and OpenFileName :
path = FreeCAD.ConfigGet("AppHomePath")
#path = FreeCAD.ConfigGet("UserAppData")
OpenName, Filter = PySide.QtGui.QFileDialog.getOpenFileName(None, "Read a txt file", path, "*.txt")
Working with QFileDialog and SaveFileName :
path = FreeCAD.ConfigGet("AppHomePath")
#path = FreeCAD.ConfigGet("UserAppData")
SaveName, Filter = PySide.QtGui.QFileDialog.getSaveFileName(None, "Save a file txt", path, "*.txt")
Example of transition from PyQt4 and PySide
PS: these examples of errors were found in the transition PyQt4 to PySide and these corrections were made, other solutions are certainly available with the examples above
try:
import PyQt4 # PyQt4
from PyQt4 import QtGui ,QtCore # PyQt4
from PyQt4.QtGui import QComboBox # PyQt4
from PyQt4.QtGui import QMessageBox # PyQt4
from PyQt4.QtGui import QTableWidget, QApplication # PyQt4
from PyQt4.QtGui import * # PyQt4
from PyQt4.QtCore import * # PyQt4
except Exception:
import PySide # PySide
from PySide import QtGui ,QtCore # PySide
from PySide.QtGui import QComboBox # PySide
from PySide.QtGui import QMessageBox # PySide
from PySide.QtGui import QTableWidget, QApplication # PySide
from PySide.QtGui import * # PySide
from PySide.QtCore import * # PySide
To access the FreeCAD interface, type : You can add new elements, like a custom widget, with commands like :
myNewFreeCADWidget = QtGui.QDockWidget() # create a new dockwidget
myNewFreeCADWidget.ui = Ui_MainWindow() # myWidget_Ui() # load the Ui script
myNewFreeCADWidget.ui.setupUi(myNewFreeCADWidget) # setup the ui
try:
app = QtGui.qApp # PyQt4 # the active qt window, = the freecad window since we are inside it
FCmw = app.activeWindow() # PyQt4 # the active qt window, = the freecad window since we are inside it
FCmw.addDockWidget(QtCore.Qt.RightDockWidgetArea,myNewFreeCADWidget) # add the widget to the main window
except Exception:
FCmw = FreeCADGui.getMainWindow() # PySide # the active qt window, = the freecad window since we are inside it
FCmw.addDockWidget(QtCore.Qt.RightDockWidgetArea,myNewFreeCADWidget) # add the widget to the main window
Working with Unicode :
try:
text = unicode(text, 'ISO-8859-1').encode('UTF-8') # PyQt4
except Exception:
text = text.encode('utf-8') # PySide
Working with QFileDialog and OpenFileName :
OpenName = ""
try:
OpenName = QFileDialog.getOpenFileName(None,QString.fromLocal8Bit("Lire un fichier FCInfo ou txt"),path,"*.FCInfo *.txt") # PyQt4
except Exception:
OpenName, Filter = PySide.QtGui.QFileDialog.getOpenFileName(None, "Lire un fichier FCInfo ou txt", path, "*.FCInfo *.txt")#PySide
Working with QFileDialog and SaveFileName :
SaveName = ""
try:
SaveName = QFileDialog.getSaveFileName(None,QString.fromLocal8Bit("Sauver un fichier FCInfo"),path,"*.FCInfo") # PyQt4
except Exception:
SaveName, Filter = PySide.QtGui.QFileDialog.getSaveFileName(None, "Sauver un fichier FCInfo", path, "*.FCInfo")# PySide
The MessageBox:
def errorDialog(msg):
diag = QtGui.QMessageBox(QtGui.QMessageBox.Critical,u"Error Message",msg )
try:
diag.setWindowFlags(PyQt4.QtCore.Qt.WindowStaysOnTopHint) # PyQt4 # this function sets the window before
except Exception:
diag.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint)# PySide # this function sets the window before
# diag.setWindowModality(QtCore.Qt.ApplicationModal) # function has been disabled to promote "WindowStaysOnTopHint"
diag.exec_()
Working with setProperty (PyQt4) and setValue (PySide)
self.doubleSpinBox.setProperty("value", 10.0) # PyQt4
replace to :
self.doubleSpinBox.setValue(10.0) # PySide
Working with setToolTip
self.doubleSpinBox.setToolTip(_translate("MainWindow", "Coordinate placement Axis Y", None)) # PyQt4
replace to :
self.doubleSpinBox.setToolTip(_fromUtf8("Coordinate placement Axis Y")) # PySide
or :
self.doubleSpinBox.setToolTip(u"Coordinate placement Axis Y.")# PySide
Документация
Больше учебников по pyQt4 (в том числе от том как использовать в python интерфейс построенный с помощью Qt Designer):
- http://www.riverbankcomputing.co.uk/static/Docs/PyQt4/html/classes.html - фициальное руководство по PyQt4 API
- http://www.rkblog.rk.edu.pl/w/p/introduction-pyqt4/ - простенькое введение
- http://www.zetcode.com/tutorials/pyqt4/ - очень полный и подробный учебник
Pivy
- homepage: https://bitbucket.org/Coin3D/coin/wiki/Home
- license: BSD
- optional, but needed by several modules of FreeCAD: Draft, Arch
Pivy is a needed by several modules to access the 3D view of FreeCAD. On windows, Pivy is already bundled inside the FreeCAD installer, and on Linux it is usually automatically installed when you install FreeCAD from an official repository. On MacOSX, unfortunately, you will need to compile pivy yourself.
Установка
Prerequisites
I believe before compiling Pivy you will want to have Coin and SoQt installed.
I found for building on Mac it was sufficient to install the Coin3 binary package. Attempting to install coin from MacPorts was problematic: tried to add a lot of X Windows packages and ultimately crashed with a script error.
For Fedora I found an RPM with Coin3.
SoQt compiled from source fine on Mac and Linux.
Debian & Ubuntu
Начиная с Debian Squeeze и Ubuntu Lucid, pivy стал доступен напрямую через официальные репозитории, экономя ваше время. В то же время вы можете скачать один из пакетов что мы сделали (для debian и ubuntu karmic) доступных на странице Загрузок , или скомпилировать их самостоятельно.
The best way to compile pivy easily is to grab the debian source package for pivy and make a package with debuild. It is the same source code from the official pivy site, but the debian people made several bug-fixing additions. It also compiles fine on ubuntu karmic: http://packages.debian.org/squeeze/python-pivy download the .orig.gz and the .diff.gz file, then unzip both, then apply the .diff to the source: go to the unzipped pivy source folder, and apply the .diff patch:
patch -p1 < ../pivy_0.5.0~svn765-2.diff
затем
debuild
теперь у вас есть правильно собраный pivy в оффициально устанавливаемых пакетах. Теперь, просто установите пакет с помощью gdebi.
Другие linux дистрибутивы
Сперва получите код из официального репозитория проекта:
hg clone http://hg.sim.no/Pivy/default Pivy
As of March 2012, the latest version is Pivy-0.5.
Затем вам понадобится инструмент называемыйd SWIG для создания C++ кода для Python привязок. Рекомендуется использовать версию SWIG 1.3.25 , не последнюю версию, потому как на данный момент pivy корректно работает только с 1.3.25. Скачайте 1.3.25 tarball с исходными кодамииз http://www.swig.org. Распакуйте и в командной строке (под root-ом):
./configure
make
make install (or checkinstall if you use it)
Сборка занимает всего несколько секунд.
Alternatively, you can try building with a more recent SWIG. As of March 2012, a typical repository version is 2.0.4. Pivy has a minor compile problem with SWIG 2.0.4 on Mac OS (see below) but seems to build fine on Fedora Core 15.
After that go to the pivy sources and call
python setup.py build
which creates the source files. Note that build can produce thousands of warnings, but hopefully there will be no errors.
This is probably obsolete, but you may run into a compiler error where a 'const char*' cannot be converted in a 'char*'. To fix that you just need to write a 'const' before in the appropriate lines. There are six lines to fix.
After that, install by issuing (as root):
python setup.py install (or checkinstall python setup.py install)
That's it, pivy is installed.
Mac OS
These instructions may not be complete. Something close to this worked for OS 10.7 as of March 2012. I use MacPorts for repositories, but other options should also work.
As for linux, get the latest source:
hg clone http://hg.sim.no/Pivy/default Pivy
If you don't have hg, you can get it from MacPorts:
port install mercurial
Then, as above you need SWIG. It should be a matter of:
port install swig
I found I needed also:
port install swig-python
As of March 2012, MacPorts SWIG is version 2.0.4. As noted above for linux, you might be better off downloading an older version. SWIG 2.0.4 seems to have a bug that stops Pivy building. See first message in this digest: https://sourceforge.net/mailarchive/message.php?msg_id=28114815
This can be corrected by editing the 2 source locations to add dereferences: *arg4, *arg5 in place of arg4, arg5. Now Pivy should build:
python setup.py build
sudo python setup.py install
Windows
Предполагается использование Visual Studio 2005 или позднии версии вы предется открыть командную строку 'Visual Studio 2005 Command prompt' из меню Tools. Если Python интерпритатор ещё не прописан в системном пути, сделайте это
set PATH=path_to_python_2.5;%PATH%
Чтобы получить работающий pivy вы должны получить последнюю версию исходников из репозитория проекта:
svn co https://svn.coin3d.org/repos/Pivy/trunk Pivy
Затем вам понадобится инструмент называемыйd SWIG для создания C++ кода для Python привязок. Рекомендуется использовать версию SWIG 1.3.25 , не последнюю версию, потому как на данный момент pivy корректно работает только с 1.3.25. Скачайте 1.3.25 tarball с исходными кодамииз http://www.swig.org. Затем распакуйте его и в командной строке добавте к системному пути
set PATH=path_to_swig_1.3.25;%PATH%
и установите COINDIR на соответсвующий путь
set COINDIR=path_to_coin
В Windows pivy конфигурационный файл нахотится в SoWin вместо SoQt по умолчанию. Мне не удалось найти очевидный способ собрать с SoQt, поэтому я изменил файл непосредственно setup.py. В 200 строке удалите часть 'sowin' : ('gui._sowin', 'sowin-config', 'pivy.gui.') (не удалйте закрывающиеся скобки).
После чего отправляйтесь к исходным кодам pivy и введите команду
python setup.py build
которая создаст исходные файлы. Вы можете столкнуться с ошибками компилятора -несколько заголовочных файлов не может быть найдено. В этом случае отрегулируйте INCLUDE переменную
set INCLUDE=%INCLUDE%;path_to_coin_include_dir
если нет заголовочных файлов SoQt на месте , также с заголовками Coin
set INCLUDE=%INCLUDE%;path_to_soqt_include_dir
и в конце Qt заголовочные файлы
set INCLUDE=%INCLUDE%;path_to_qt4\include\Qt
Если вы используете Express Edition версию Visual Studio вы можете получить исключение python keyerror. В этом случае Вам необходимо изменить кое-что в msvccompiler.py расположенный в месте кужа вы установили Python.
шагом марш на 122 строку и замените строку
vsbase = r"Software\Microsoft\VisualStudio\%0.1f" % version
на
vsbase = r"Software\Microsoft\VCExpress\%0.1f" % version
Повторите сборку снова. Если вы получили вторую ошибку, вроде
error: Python was built with Visual Studio 2003;...
вы должны поменять 128 строку
self.set_macro("FrameworkSDKDir", net, "sdkinstallrootv1.1")
на
self.set_macro("FrameworkSDKDir", net, "sdkinstallrootv2.0")
Повторите сборку снова. Если вы опять получили ошибку
error: Python was built with Visual Studio version 8.0, and extensions need to be built with the same version of the compiler, but it isn't installed.
проверте пересеменные окружения DISTUTILS_USE_SDK и MSSDK с помощью
echo %DISTUTILS_USE_SDK%
echo %MSSDK%
Если они еще не установлены, то просто установите например, до 1
set DISTUTILS_USE_SDK=1
set MSSDK=1
Вы можете столкнуться при компиляции с ошибкой 'const char*' cannot be converted in a 'char*'. Чтобы исправить это вам необходимо написать 'const' перед следующей строкой(char*). Исправте ещё шесть строк. После чего, скопируйте созданный pivy каталог, в место где python интрепритатор FreeCAD сможет найти его.
Usage
To check if Pivy is correctly installed:
import pivy
Чтобы Pivy получил доступ FreeCAD древу сцен сделайте следующие:
from pivy import coin
App.newDocument() # Open a document and a view
view = Gui.ActiveDocument.ActiveView
FCSceneGraph = view.getSceneGraph() # returns a pivy Python object that holds a SoSeparator, the main "container" of the Coin scenegraph
FCSceneGraph.addChild(coin.SoCube()) # add a box to scene
Теперь вы можете изучать FCSceneGraph с помощью команды dir().
Additonal Documentation
Unfortunately documentation about pivy is still almost inexistant on the net. But you might find Coin documentation useful, since pivy simply translate Coin functions, nodes and methods in python, everything keeps the same name and properties, keeping in mind the difference of syntax between C and python:
- https://bitbucket.org/Coin3D/coin/wiki/Documentation - Coin3D API Reference
- http://www-evasion.imag.fr/~Francois.Faure/doc/inventorMentor/sgi_html/index.html - The Inventor Mentor - The "bible" of Inventor scene description language.
Вы также можете просмотреть в Draft.py файл в папке FreeCAD Mod/Draft , так как там часто используется pivy.
pyCollada
- homepage: http://pycollada.github.com
- license: BSD
- optional, needed to enable import and export of Collada (.DAE) files
pyCollada is a python library that allow programs to read and write Collada (*.DAE) files. When pyCollada is installed on your system, FreeCAD will be able to handle importing and exporting in the Collada file format.
Installation
Pycollada is usually not yet available in linux distributions repositories, but since it is made only of python files, it doesn't require compilation, and is easy to install. You have 2 ways, or directly from the official pycollada git repository, or with the easy_install tool.
Linux
In either case, you'll need the following packages already installed on your system:
python-lxml
python-numpy
python-dateutil
From the git repository
git clone git://github.com/pycollada/pycollada.git pycollada
cd pycollada
sudo python setup.py install
With easy_install
Assuming you have a complete python installation already, the easy_install utility should be present already:
easy_install pycollada
You can check if pycollada was correctly installed by issuing in a python console:
import collada
If it returns nothing (no error message), then all is OK
Windows
- Install Python. While FreeCAD and some other programs come with a bundled version of Python, having a fixed install will help with the next steps. You can get Python here: https://www.python.org/downloads/ . Of course you should pick the right version, in this case that would be 2.6.X, as FreeCAD currently uses 2.6.2 (Personally I went with 2.6.2, and by the way, you can check the version yourself by starting the Python.exe in the bin folder of FreeCAD). You'll also have to add the path of the installation directory into the path variable so you can access Python from the cmd. Now we can install the missing things, in total there are 3 things we need to install: numpy, setuptools, pycollada
- Fetch numpy here: http://sourceforge.net/projects/numpy/files/NumPy/ . Pick a version which fits to the version used by FreeCAD, there are multiple installers for different Python versions in every numpy version folder, the installer will put numpy into the folder of your Python installation, where FreeCAD can access it as well
- Fetch setuptools here: https://pypi.python.org/pypi/setuptools (We need to install the setuptools in order to install pycollada in the next step)
- Unzip the downloaded setuptools file somewhere
- Start a cmd with admin permission
- Navigate to the unpacked setuptools folder
- Install the setuptools by tipping "Python setup.py install" into the cmd, this will not work when Python is not installed or when the path variable hasn't been configured
- Fetch pycollada here: https://pypi.python.org/pypi/pycollada/ (has already been posted above) and once again:
- Unzip the downloaded pycollada file somewhere
- Start a cmd with admin permission, or use the one you opened not long ago
- Navigate to the unpacked pycollada folder
- Install the setuptools by tipping "Python setup.py install" into the cmd
- Another reference on how to use easy_install: http://jishus.org/?p=452
Mac OS
If you are using the Homebrew build of FreeCAD you can install pycollada into your system Python using pip.
If you need to install pip:
$ sudo easy_install pip
Install pycollada:
$ sudo pip install pycollada
If you are using a binary version of FreeCAD, you can tell pip to install pycollada into the site-packages inside FreeCAD.app:
$ pip install --target="/Applications/FreeCAD.app/Contents/lib/python2.7/site-packages" pycollada
or after downloading the pycollada code
$ export PYTHONPATH=/Applications/FreeCAD\ 0.16.6705.app/Contents/lib/python2.7/site-packages:$PYTHONPATH
$ python setup.py install --prefix=/Applications/FreeCAD\ 0.16.6705.app/Contents
IfcOpenShell
- homepage: http://www.ifcopenshell.org
- license: LGPL
- optional, needed to extend import abilities of IFC files
IFCOpenShell is a library currently in development, that allows to import (and soon export) Industry foundation Classes (*.IFC) files. IFC is an extension to the STEP format, and is becoming the standard in BIM workflows. When ifcopenshell is correctly installed on your system, the FreeCAD Arch Module will detect it and use it to import IFC files, instead of its built-in rudimentary importer. Since ifcopenshell is based on OpenCasCade, like FreeCAD, the quality of the import is very high, producing high-quality solid geometry.
Installation
Since ifcopenshell is pretty new, you'll likely need to compile it yourself.
Linux
You will need a couple of development packages installed on your system in order to compile ifcopenshell:
liboce-*-dev
python-dev
swig
but since FreeCAD requires all of them too, if you can compile FreeCAD, you won't need any extra dependency to compile IfcOpenShell.
Grab the latest source code from here:
svn co https://svn.code.sf.net/p/ifcopenshell/svn/trunk ifcopenshell ifcopenshell
or
svn co https://ifcopenshell.svn.sourceforge.net/svnroot/ifcopenshell ifcopenshell
The build process is very easy:
mkdir ifcopenshell-build
cd ifcopenshell-build
cmake ../ifcopenshell/cmake
or, if you are using oce instead of opencascade:
cmake -DOCC_INCLUDE_DIR=/usr/include/oce ../ifcopenshell/cmake
Since ifcopenshell is made primarily for Blender, it uses python3 by default. To use it inside FreeCAD, you need to compile it against the same version of python that is used by FreeCAD. So you might need to force the python version with additional cmake parameters (adjust the python version to yours):
cmake -DOCC_INCLUDE_DIR=/usr/include/oce -DPYTHON_INCLUDE_DIR=/usr/include/python2.7 -DPYTHON_LIBRARY=/usr/lib/python2.7.so ../ifcopenshell/cmake
Then:
make
sudo make install
You can check that ifcopenshell was correctly installed by issuing in a python console:
import IfcImport
If it returns nothing (no error message), then all is OK
Windows
Copied from the IfcOpenShell README file
Users are advised to use the Visual Studio .sln file in the win/ folder. For Windows users a prebuilt Open CASCADE version is available from the http://opencascade.org website. Download and install this version and provide the paths to the Open CASCADE header and library files to MS Visual Studio C++.
For building the IfcPython wrapper, SWIG needs to be installed. Please download the latest swigwin version from http://www.swig.org/download.html . After extracting the .zip file, please add the extracted folder to the PATH environment variable. Python needs to be installed, please provide the include and library paths to Visual Studio.
Links
Tutorial Import/Export IFC - compiling IfcOpenShell
Teigha Converter
- homepage: http://www.opendesign.com/guestfiles/TeighaFileConverter
- license: freeware
- optional, used to enable import and export of DWG files
The Teigha Converter is a small freely available utility that allows to convert between several versions of DWG and DXF files. FreeCAD can use it to offer DWG import and export, by converting DWG files to the DXF format under the hood,then using its standard DXF importer to import the file contents. The restrictions of the DXF importer apply.
Installation
On all platforms, only by installing the appropriate package from http://www.opendesign.com/guestfiles/TeighaFileConverter . After installation, if the utility is not found automatically by FreeCAD, you might need to set the path to the converter executable manually, in the menu Edit -> Preferences -> Draft -> Import/Export options.