Spanish Translation

From FreeCAD Documentation
Revision as of 00:32, 21 December 2023 by Hasecilu (talk | contribs) (Secciones Draft, FEM, Inspección, Malla, OpenSCAD agregadas)

Cualquier parecido con la página de traducción alemana es pura coincidencia.


Esta guía de traducción al español pretende ser una guía para elegir los mejores términos en nuestro idioma para conseguir una traducción consistente en los diferentes subproyectos que conforman el ecosistema de FreeCAD.

Cada recomendación debe ser validada en el foro en español.: Traducción de FreeCAD, que es el lugar apropiado para el intercambio. Se debe establecer la conexión entre la publicación de validación y esta página. Siempre traduce Workbench como Entorno de trabajo.


Para poder crear traducciones consistentes necesitamos algunas reglas que aquellos que estén dispuestos a discutir en el foro acuerden o ya hayan acordado además de necesitar una Ayuda de traducción de los términos utilizados en el programa para poder crear traducciones comprensibles, precisas y técnicamente correctas.

Reglas

Introducción

¿Te ha pasado? Buscas ayuda en la wiki versión en español, encuentras la página correcta, lees un poco, te sorprendes con términos y declaraciones sin sentido y lees el original en inglés para ver de que trata y nada ue ver o buscas algún comando por su nombre en español y resulta que es diferente la traducción en la wiki respecto a la existente en el programa.

Ese no puede ser el objetivo de una traducción.

El cambio entre las diferentes traducciones es molesto, ¿no?

Cómo se puede mejorar la calidad de la traducción reemplazando declaraciones técnicamente correctas con, en el mejor de los casos, descripciones simples para que uno "se acerque más al original en inglés" es un misterio para algunos usuarios y traductores activos en el foro. De la discusión en el foro sobre la calidad de las traducciones surge el deseo de establecer reglas para la traducción tanto de la interfaz de usuario de FreeCAD como de las páginas wiki.

Al mejorar las publicaciones, la referencia a una regla suele ser más comprensible que explicaciones como "una completa tontería" o "peor que antes". Si las reglas están numeradas consecutivamente, un comentario puede ser significativamente más corto. Por ejemplo, "Las combinaciones de palabras se escriben juntas" se convierte en "Se aplica la regla X".

Las reglas acordadas en el foro se enumeran aquí.

Reglamento

General

R0: Regla número 0

Descripción de la regla 0.

Wiki

Rn: Regla número n.

Descripción de la regla n.

Ayuda para traducción

Contiene:

  • Traducciones de las entradas del menú ordenadas por área de trabajo, con sugerencias de cambios si es necesario.
  • Esto tiene como objetivo, entre otras cosas, facilitar la comparación con las entradas de Crowdin (eliminando la necesidad de cambiar constantemente la configuración de idioma FC entre inglés y español).
  • Explicaciones de términos técnicos con los que no todo el mundo está familiarizado

Así se complementa (¡Este sitio se nutre de la participación!):

  • Si un término/expresión no está disponible, se debe agregar. Si no hay objeciones, no es necesario hacer nada más.
  • Si hay objeciones, se deben discutir en el foro para acordar cómo proceder (editar, eliminar...).

Términos más comunes

Interfaz de usuario de FreeCAD (Interfaz)

Los términos presentados en esta tabla fueron tomados de la página de la wiki de FreeCAD Interfaz.

Expresión en inglés Función Expresión en español Comentarios
Interface Interfaz Ventana principal de FreeCAD
Main view area Window area Área de visualización principal
3D view Window area Vista 3D
Combo view Window area Vista combo
Tree view Window area Vista de árbol
Task panel Window area Panel de tareas
Property editor Window area Editor de propiedades
Selection view Window area Vista de selección
Report view Window area Vista de informe
Python console Window area Consola de Python
Status bar Window area Barra de estado
Toolbar area Window area Barra de herramientas
Workbench selector Window area Selector de entorno de trabajo
Standard menu Window area Menú estándar

Sección Wiki Std Base

Colección de funciones y herramientas disponibles para todos los entornos de trabajo. Los términos presentados en esta tabla fueron tomados de la página de la wiki de FreeCAD Std Base.

Expresión en inglés Función Expresión en español Comentarios
Std Base Workbench name
File menu
File Menu header
New Command
Edit menu
Edit Menu header
Undo Command
View menu
View Menu header
Create new view Command
Standard views Generic term
Fit all Command
Fit selection Command
Axonometric Generic term
Isometric Command
Dimetric Command
Trimetric Command
Home Command
Front Command
Top Command
Right Command
Rear Command
Bottom Command
Left Command
Rotate left Command
Rotate right Command
Freeze display Generic term
Save views... Command
Load views... Command
Freeze view Command
Clear views Command
Draw style Generic term
As is Command
Points Command
Wireframe Command
Hidden line Command
No shading Command
Shaded Command
Flat lines Command
Bounding box Command
Stereo Generic term
Stereo red/cyan Command
Stereo quad buffer Command
Stereo interleaved Rows Command
Stereo interleaved Columns Command
Stereo Off Command
Issue camera position Command
Zoom Generic term
Zoom in Command
Zoom out Command
Box zoom Command
Document window Generic term
Docked Command
Undocked Command
Full screen Command
Toggle axis cross Command
Clipping plane Command
Persistent section cut Command
Texture mapping... Command
Visibility Generic term
Workbench Generic term
Toolbars Generic term
File Command, toggle
Workbench Command, toggle
Macro Command, toggle
View Command, toggle
Structure Command, toggle
Panels Generic term
Report view Command, toggle
Selection view Command, toggle
Combo view Command, toggle
Python comsole Command, toggle
TreeView actions Generic term
Status bar Command, toggle
Tools Menu header
Edit parameters... Command
Macro menu
Macro Menu header
Macro recording... Command
Stop macro recording Command
Macros... Command
Recent macros Command
Execute macro Command
Attach to remote debugger... Command
Debug macro Command
Stop debugging Command
Step over Command
Step into Command
Toggle breakpoint Command
Windows menu
Windows Menu header
Next Command
Help menu
Help Menu header
Help Command
Additional tools panel
Structure Panel header
Create part Command
Create Group Command
Make link Command
Link actions Generic term
Make sub-link Command
Replace with link Command
Unlink Command
Import link Command
Import all links Command

Entornos de trabajo base

Arch

Expresión en inglés Función Expresión en español Comentarios
Arch Workbench name
Arch Menu header
Utilities Generic term
Component Command
Wall Command
Structure tools Generic term
Axis tools Generic term
Panel tools Generic term
Material tools Generic term
Pipe tools Generic term
Draft Menu header
Creation Generic term
Annotation Generic term
Modification Generic term
Utilities Generic term

Draft

Expresión en inglés Función Expresión en español Comentarios
Draft Workbench name Draft Arbeitsbereich, nicht übersetzen!
Drafting Menue header Drafting Menü-Überschrift (übersetzen?)
Arc tools Generic term Arc tools Übersetzen?
Bezier tools Generic term Bezier tools Übersetzen?
Annotation Menue header Annotation Menü-Überschrift (übersetzen? Beschriftung)
Text Command Text
Dimension Command Abmessung Maße für das Ergebnis oder Bemaßung für die Tätigkeit
Label Command Bezeichnung Anmerkung, Hinweis?
Annotation styles... Command Anmerkungs Stile (wenigstens mit Bindestrich...) Beschriftungstil(e)?
Modification Menue header Modification Menü-Überschrift (übersetzen?)
Move Command Verschieben
Array tools Generic term Array tools Übersetzen?
Array Command Array Übersetzen? Anordnung
Utilities Menue header Utilities Menü-Überschrift (übersetzen?)
Set style Command Stil festlegen

FEM

Expresión en inglés Función Expresión en español Comentarios
FEM Workbench name
Model Menue header
Analysis container Command
Materials Generic term
Material for solid Command
Material for fluid Command
Nonlinear mechanical material Command
Reinforced material (concrete) Command
Material editor Command
Element Geometry Generic term
Beam cross section Command
Beam rotation Command
Shell plate thickness Command
Fluid section for 1D flow Command
Electromagnetic Constraints Generic term
Constraint electrostatic potential Command
Constraint current density Command
Constraint magnetization Command
Fluid Constraints Generic term
Constraint initial flow velocity Command
Constraint initial pressure Command
Constraint flow velocity Command
Geometrical Constraints Generic term
Constraint plane rotation Command
Constraint section print Command
Constraint transform Command
Mechanical Constraints Generic term
Constraint fixed Command
Constraint displacement Command
Constraint contact. Command
Constraint tie Command
Constraint spring Command
Constraint force Command
Constraint pressure Command
Constraint centrif Command
Constraint self weight Command
Thermal Constraints Generic term
Constraint initial temperature Command
Constraint heatflux Command
Constraint temperature Command
Constraint body heat source Command
Overwrite Constants Generic term
Constant vacuum permittivity Command
Mesh Menue header
FEM mesh from shape by Netgen Command
FEM mesh from shape by Gmsh Command
FEM mesh boundary layer Command
FEM mesh region Command
FEM mesh group Command
Nodes set Command
FEM mesh to mesh Command
Solve Menue header
Solver CalculiX Standard Command
Solver Elmer Command
Solver Mystran Command
Solver Z88 Command
Mechanical equations Generic term
Elasticity equation Command
Deformation equation Command
Electromagnetic equations Generic term
Electrostatic equation Command
Electricforce equation Command
Magnetodynamic equation Command
Magnetodynamic 2D equation Command
Flow equation Command
Flux equation Command
Heat equation Command
Solver job control Command
Run solver calculations Command
Results Menue header
Purge results Command
Show result Command
Apply changes to pipeline Command
Post pipeline from result Command
Warp filter Command
Scalar clip filter Command
Function cut filter Command
Region clip filter Command
Contours filter Command
Line clip filter Command
Stress linearization plot Command
Data at point clip filter Command
Filter functions Generic term
Plane Command
Sphere Command
Cylinder Command
Box Command
Utilities Menue header
Clipping plane on face Command
Remove all clipping planes Command
Open FEM examples Command

Inspección

Expresión en inglés Función Expresión en español Comentarios
Inspection Workbench name
Inspection Menue header
Visual inspection... Command
Inspection Command

Malla

Expresión en inglés Función Expresión en español Comentarios
Mesh Workbench name
Meshes Menue header
Import mesh... Command
Export mesh... Command
Create mesh from shape... Command
Refinement... Command
Analyze Generic term
Boolean Generic term
Cutting Generic term

OpenSCAD

Expresión en inglés Función Expresión en español Comentarios
OpenSCAD Workbench name
OpenSCAD Menue header
Replace Object Command
Remove Object and their children Command
Refine Shape Feature Command
Mirror Mesh Feature... Command
Scale Mesh Feature... Command
Resize Mesh Feature... Command
Increase Tolerance Feature Command
Convert Edges To Faces Command
Expand Placements Command
Explode Group Command
Color Code Shape Command
Add OpenSCAD Element Command
Mesh Boolean Command
Hull Command
Minkowski Command

Template

Expresión en inglés Función Expresión en español Comentarios


Entornos de trabajo externos

Assembly3

La traducción en las páginas de la wiki, aún falta la interfaz de usuario.

Expresión en inglés Función Expresión en español Comentarios
Assembly3 Workbench name
Assembly3 Menue header
Create assembly Command
Group objects Command
Create element Command
Import from STEP Generic term
Import from STEP Command
Import as multi-document Command
Solve constraints Command
Quick solve Command
Move part Command
Axial move part Command
Quick move Command
Lock mover Command
Toggle part visibility Command
Trace part move Command
Auto recompute Command
Smart recompute Command
Auto fix element Command
Element style Generic term
Auto element visibility Command
Show element coordinate system Command
Workplan and origin Generic term
Add workplane Command
Add XZ workplane Command
Add ZY workplane Command
Add placement Command
Add Origin Command
Go to relation Command
Select linked object Command
Select linked final Command
Move item up Command
Move item down Command
Multiply constraint Command

SheetMetal

La traducción del entorno de trabajo SheetMetal se realiza en su repositorio de GitHub.

Expresión en inglés Función Expresión en español Comentarios
Sheet Metal Workbench name
Sheet Metal Menue header
Make Base Wall Command
Make Wall Command
Extend Face Command
Fold a Wall Command
Unfold Command
Unattended Unfold Command
Add Corner Relief Command
Make Relief Command
Make Junction Command
Make Bend Command
Sketch On Sheet metal Command
Make Forming in Wall Command

Fasteners

La traducción del entorno de trabajo Fasteners se realiza en su repositorio de GitHub.

Expresión en inglés Función Expresión en español Comentarios
Fasteners Workbench name Elementos de sujeción ¿debería de traducirse?
Fasteners Menu header Elementos de sujeción ¿debería de traducirse?
Screw Noun Tornillo

Render

Expresión en inglés Función Expresión en español Comentarios
Render Workbench name
Render Menue header
Projects Generic term
Appleseed Project Command
Cycles Project Command
Luxcore Project Command
Ospray Project Command
Pbrt Project Command
Povray Project Command
Camera Command
Lights Generic term
Point Light Command
Area Light Command
Sunsky Light Command
Image Light Command
Rendering View Command
Materials Generic term
Create Material Command
Edit Material Rendering Settings Command
Apply Material Command
Render Command

Términos técnicos

Del inglés

Expresión en inglés Función Expresión en español Comentarios
Constraint Noun Restricción
Topological naming problem Noun Problema de denominación topológica

Del español

Ausdruck Beschreibung

Dibujo

cota Los objetos/piezas de trabajo tienen dimensiones como longitud, anchura, altura y espesor de pared. Se ingresan como dimensiones en un dibujo.