Translations:Arch Window/29/en

From FreeCAD Documentation
Revision as of 15:41, 15 May 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
  1. Optionally, select a face on the Arch object where you want the window to be included.
  2. Switch to the Sketcher Workbench.
  3. Create a new sketch.
  4. Draw one or more closed wires (loops). Pay close attention to the creation order of these loops, the numbering of the "wires" in the task panel ("Window elements") depends on this.
  5. Close the sketch.
  6. Switch back to the Arch Workbench.
  7. Press the Arch Window button, or press W then I keys.
  8. To adjust the window components and various properties, enter the window task panel by double-clicking on the created object in the tree view.
  9. Note that since components following a hinged component will also hinge, all fixed components, such as outer frames and fixed glass panels, must be defined before any hinged components. And a glass panel in a hinged frame must be defined after that frame, and before any other hinged components.