FCGear CrownGear/it: Difference between revisions

From FreeCAD Documentation
(Created page with "La ruota dentata ricorda una cremagliera curva a forma di anello. L'angolo di pressione diminuisce continuamente dal diametro esterno a quello interno. In questo modo la velocità periferica variabile della corona dentata viene compensata con la velocità periferica costante del pignone. I denti esterni appuntiti e i fianchi ripidi del dente sul diametro interno limitano la larghezza utile del dente. Gli ingranaggi a corona raggiungono efficienze simili agli ingranaggi c...")
(Created page with "# Passare a 16px FCGear. # Esistono diversi modi per richiamare il comando: #* Premere il pulsante {{Button|16px Crown Gear}} nella barra degli strumenti. #* Selezionare l'opzione {{MenuCommand|Gear → 16px Crown Gear}} dal menu. # Per default la corona dentata viene visualizzata senza denti. ({{Version/it|0.21}}) # Modificare i...")
Line 38: Line 38:
==Utilizzo==
==Utilizzo==


# Switch to the [[Image:FCGear_workbench_icon.svg|16px]] [[FCGear_Workbench|FCGear Workbench]].
# Passare a [[Image:FCGear_workbench_icon.svg|16px]] [[FCGear_Workbench/it|FCGear]].
# Esistono diversi modi per richiamare il comando:
# There are several ways to invoke the command:
#* Press the {{Button|[[File:FCGear_CrownGear.svg|16px]] [[FCGear_CrownGear|Crown Gear]]}} button in the toolbar.
#* Premere il pulsante {{Button|[[File:FCGear_CrownGear.svg|16px]] [[FCGear_CrownGear/it|Crown Gear]]}} nella barra degli strumenti.
#* Select the {{MenuCommand|Gear → [[File:FCGear_CrownGear.svg|16px]] Crown Gear}} option from the menu.
#* Selezionare l'opzione {{MenuCommand|Gear → [[File:FCGear_CrownGear.svg|16px]] Crown Gear}} dal menu.
# The crown gear is displayed without teeth by default. ({{Version|0.21}})
# Per default la corona dentata viene visualizzata senza denti. ({{Version/it|0.21}})
# Modificare i parametri dell'ingranaggio alle condizioni richieste (vedere [[#Proprietà|Proprietà]]).
# Change the gear parameters to the required conditions (see [[#Properties|Properties]]).
# Set the {{PropertyData|preview_mode}} property to {{false}} to display the teeth (see [[#Notes|Notes]]).
# Impostare la proprietà {{PropertyData|preview_mode}} su {{false}} per visualizzare i denti (vedere [[#Note|Note]]).


<span id="Properties"></span>
<span id="Properties"></span>

Revision as of 16:21, 25 May 2024

Other languages:

Corona dentata

Posizione nel menu
Gear → Crown Gear
Ambiente
FCGear
Avvio veloce
None
Introdotto nella versione
v0.16
Vedere anche
Ingranaggio ad evolvente

Descrizione

La ruota dentata ricorda una cremagliera curva a forma di anello. L'angolo di pressione diminuisce continuamente dal diametro esterno a quello interno. In questo modo la velocità periferica variabile della corona dentata viene compensata con la velocità periferica costante del pignone. I denti esterni appuntiti e i fianchi ripidi del dente sul diametro interno limitano la larghezza utile del dente. Gli ingranaggi a corona raggiungono efficienze simili agli ingranaggi cilindrici. Una corona dentata può azionare più pignoni.

Campi di applicazione noti per le corone dentate:

  • Azionamenti dell'asse posteriore per auto e moto
  • Meccanismo girevole per tavoli operatori
  • Teste per fresatura angolare
  • Sistemi di utensili motorizzati con pignoni multipli e corona dentata

Sopra: corona dentata

Utilizzo

  1. Passare a FCGear.
  2. Esistono diversi modi per richiamare il comando:
    • Premere il pulsante Crown Gear nella barra degli strumenti.
    • Selezionare l'opzione Gear → Crown Gear dal menu.
  3. Per default la corona dentata viene visualizzata senza denti. (disponibile dalla versione 0.21)
  4. Modificare i parametri dell'ingranaggio alle condizioni richieste (vedere Proprietà).
  5. Impostare la proprietà Datipreview_mode su false per visualizzare i denti (vedere Note).

Proprietà

Un oggetto FCGear CrownGear deriva da un oggetto Part Feature e ne eredita tutte le proprietà. Ha inoltre le seguenti proprietà aggiuntive:

Dati

accuracy

  • Datinum_profiles (Integer): Default is 4. Number of profiles used for loft.
  • Datipreview_mode (Bool): Default is true.

base

  • Datiheight (Length): Default is 2 mm. Value for the tooth width.
  • Datimodule (Length): Default is 1 mm. Module is the ratio of the reference diameter of the gear divided by the number of teeth (see Notes).
  • Datiother_teeth (Integer): Default is 15. Number of teeth of the construction gear (pinion) (see Notes).
  • Datiteeth (Integer): Default is 15. Number of teeth.
  • Datithickness (Length): Default is 5 mm. Height from the tip of tooth to the lower side of the crown wheel.

involute

  • Datipressure_angle (Angle): Default is 20 ° (see Notes).

version

  • Dativersion (String):

Note

  • The Datipreview_mode property is set to true by default and when the gear is created you'll find this message in the report view:
    Gear module: Crown gear created, preview_mode = true for improved performance. Set preview_mode property to false when ready to cut teeth.
  • module: Using ISO (International Organization for Standardization) guidelines, Module size is designated as the unit representing gear tooth-sizes. Module (m): m = 1 (p = 3.1416), m = 2 (p = 6.2832), m = 4 (p = 12.566). If you multiply Module by Pi, you can obtain Pitch (p). Pitch is the distance between corresponding points on adjacent teeth.
  • other_teeth: Several pinions with the same number of teeth only can be used on one crown wheel.
  • pressure_parameter: Only change the parameter, if sufficient knowledge of the gear geometry is available.
  • The geometry of the crown gear is primarily determined by the spur pinion geometry (other_teeth).
  • Create spur gear with Involute gear. The number of teeth must be identical to the parameter other_teeth of the crown gear.
  • Adjustments for optimal running characteristics can be made with the parameters of involute gear.

Panoramica dell'insieme corona e ingranaggio cilindrico

  • (1) Spur gear
  • (2) Crown gear
  • (3) Tooth width
  • (4) Inner diameter
  • (5) Outer diameter

Formule utili

  • Inner diameter (4)
    • inner diamter = module (spur gear) * teeth (crown gear) * cos pressure_paramter (pinion) : cos pressure_parameter (crown gear)
  • Outer diameter (5)
    • outer diamter = inner diameter + 2x height (tooth width crown gear)